Is the Monarchy DIP effective?

The Genesis is somewhat different. In simplistic terms the Monarchy DIP is just a phase locked loop jitter reducer, while the Genesis Digital Lens stores the data stream and re-clocks it, as well as re-dithering.

While I have not tried a Monarchy DIP, I have used either an Audio Alchemy DTI, DTI 2.0 or DTI Pro for several years. All of them effected some level of improvement in clarity, bass response and tonal balance. They also seem to reduce the level of tension that is frequently associated with digital playback. While the degree of improvement varied with different transports, usually the degree of improvement was greater with cheaper transports and almost mandatory with some. Using a jitter reduction device will require an extra digital interconnect, but imho, I consider them a requirement to achieve acceptable digital sound. If the Monarchy can be obtained on a trial basis, it is definitely worth trying.

I would suggest the camelot technology 5.1 jitter reduction device as it covers all the basis of digital streams and is supposedly an improved version of the audio alchemy jitter reduction boxes

previous post--grammatical correction bases for basis

I have a MkI DIP that I've used for several years. I've found its effectiveness ultimately hinges on both transport quality and the DAC's receiver section in particular. It brought significant improvements to a older CD player's toslink signal when feeding an older receiver chip. However, with either a quality low jitter transport or a newer Crystal receiver chip (the CS8414 for example), the results were marginal. I would imagine that for the best low jitter transports and DACs, the DIP may actually degrade performance. I suspect the DIP reclocks via its PLL no better than a certain design limited level of jitter (I can't imagine it would ever be better than 250 ps, considering the age of its design). 250 ps was considered a very good jitter specification five years ago - if that's better than your transport and DAC's native jitter levels, you've gained; if not, you've taken a step backwards. I believe the latest Crystal receivers have intrinsic jitter around 150-200 ps. The DIP doesn't compare to the new technology jitter busters, IMHO (the 2 ps output D2D-1 that I now use comes to mind). But at its price and in the right system, the DIP is still a good value.