Chemically Altered Audio

'Nanotape'...I'll look into that...thanks. *S*

(The obvious pun was "Will I need to get the nanocorder for it?", but that's just being rude..."nanomuzic"...*G*  I'll stop....")

Since I'm using an all metal cone, and there's a need to damp inter-modulation distortion from reflected waveforms....thought I might deal with another potential issue at the same time....
Thought water as a means of thinning would be fine...thanks for verifying.

@danvignau ...Now, don't get them mixed up...;)...and why are you just 'smelling' the 'other'....?! 

*sigh*  It's a good thing I'm committed to performing a PubicI mean Public Service by keeping 'it' out of the hands of those who are wastedImean Wasting 'Its' medicinal qualities.....😆

...and if there's anyone that needs mediocreImean Medicinal treats...Treatment....it's Me.
*red-eyed* ;)

When mixing the Part 1 formula, here are a few notes:

It would be easier to use barium titanate instead of lead zirconate titanate (PZT). You can get barium titanate on ebay in small quantities, but it’s much more difficult to source PZT which contains lead. Barium titanate is not as powerful as PZT but if you use a little more in the mix, it’s still quite good.

Shungite powder is almost pure carbon. You can source it from Russia via eBay, The seller is trustworthy, and I have dealt with them 3 times with no difficlties. But if you don’t want to order from Russia, you can use Ketjen carbon black with similar results. You can get that locally.

If you’re worried about playing around with graphene nanoparticles, you can also get graphene as a suspension (liquid). There’s no possibility of inhaling it. It works the same when mixed with PVA glue.

It’s also a good idea to mix some mica into the Part 1 mix. Synthetic mica and natural mica both work very well, and I use a bit of each sometimes.

You can isolate various ingredients into layers, which can increase the power of the final product. For example, if you mix PVA, graphene and (piezoelctric material of your choice), it works extremely well as a coating directly on a crystal layer (such as silicon carbide).

Finally, you can add various fine powdered crystal sands to the Part 1 or Part 2 mix. I use silicon carbide and aluminum oxide because they are very effective and very cheap ways to buy powdered crystal material, but I have also used many other varieties of powdered crystals, and each has a different effect as Mahgister has pointed out elsewhere. The best I have found is a mixture of 12 crystal powders which I call Tutti Frutti.

After you have painted the layers onto sandpaper and dried the sheets in the sun, cut them into 30mm strips. Stick nanotape onto the reverse side of the strips (which can also contain layers). Don’t remove the protective film from the nanotape until you’re ready to apply the material to cables, chassis etc. The nanotape can be quite difficult to remove once stuck, so don’t use it on anything that could be damaged such as painted logos etc.

Ahhh....*S*  Now, that's some technical details that were missing from all the previous...;)  The means of 'making the souffle' can be as important as the ingredients required...and thanks for all that.
It outlines fairly concisely the 'how to'; and the addition of potentially layering variations of mixtures is intriguing....
Before this forum fades into digital obscurity, I'll back up and 'snip' some of your posts regarding this subject, for references' sake. *S*
You obviously have your notes....in this way, I can have mine. ;)
If anyone would like a copy, they're free to ask....with your permission, of course. 
Don't want to let Merlin's Magic fall into abuse...*G*

Thanks, J

Cool, Jerry. I’m happy to give permission to anyone who wants to try making the formula. For any reason, commercial or hobbyist. I see no reason why this basic but arcane knowledge should be kept secret. Who knows, someone out there may improve on it, and make something even better. The formula as it stands is more powerful (but different) than anything commercially available that I have tried so far. I have not tried everything of course.

Here’s a couple of photos, showing a batch of the Tutti Frutti formula. The small pieces are cut from large sheets, and have the nanotape already attached to the "Part 1" formula side. The darker coloured ones are a from a batch with more graphene and germanium, and sound even better than the light ones (maybe 10 percent better). The large black sheet is brand new made today and contains very thick layers of active ingredients, golden mica and a lot of Tutti Frutti crystal mix as you can see by the lumpy surface. I have not tested it yet.

http://www.g45central.com/posts/BoxOfTutti1.jpg
http://www.g45central.com/posts/BoxOfTutti2.jpg

If you don't want the lumpy surface, don't add extra crystal, just use the 1000 mesh silicon carbide for the crystal component. The small pieces can give a superpowerful effect, almost as much effect as an entire mat, when they are stuck in the right places using nanotape. The more you use, the better it sounds. I should know. I’ve used 2 boxes full on my system.