Cube Audio Nenuphar Single Driver Speaker (10 inch) TQWT Enclosure

Steve, glad you tried isolating the speakers and heard an improvement. I think this is definitely something most speakers would benefit from. Townshend are a good commercially available product that work with a variety of speakers. My Townshend platforms can accommodate both the 8 and 10 inch Nenuphar’s. I still use the spikes and cups at the front, they just sit on the aluminium platforms. I secure the cups in place with industrial double sided tape.

Which size Townshend platform do you use? In addition, the Star Sound line of platforms are also very good.

stevendunn
My only complaint is that the foot print of the podium is fairly large and not wildly attractive. I’m sure Cube and Townshend could design something that was a more compact part of the speaker (purchased as an option?). Yes it would raise the speaker price by $2K or so, but the improvement IMHO is more than worth it.

>>>>>It’s not obvious but the footprint of the iso device must be large to obtain the required lateral stability for objects with high center of gravity. Sure, you could make the springs stiffer with a smaller footprint but then the device wouldn’t isolate as well.

grannyring
The Townshend podiums are size 4 with load capacity E which starts at 85lbs so I put a couple of VPI bricks on top of each speaker since they are about 80lbs each.

geoffkait
Makes sense.

I have size 3, which accommodates both 8 and 10 inch Nenuphar’s. Size 2 should be ok with 8 inch only.