I’m using enigmacoustics sopraninios permanently charged electrostatic supertweeters to goo effect, if they are in your price range .
Super tweeter for FullRange Driver
I have a pair of Audio Nirvana 15in Alinco Classics that I just got done getting into cabinets. After some listening impressions, I've realized I cant live with the high frequency response these things put out by themselves. They only go to about 15k hz. and it's made music lose its sparkle and sense of space and spacial cues. I was thinking of buying a pair of Fostek T90As and pointing them at the ceiling for a more even dispersion and better integration with the Audio Nirvana driver. My main question is what capacitor volume would you suggest? Where in the frequency response would you crossover to the tweeter? Would wiring the 8ohm tweeter and the 8ohm Audio Nirvana in parallel make me need to change my amp(Audio Note Kit 1 300b Set) from 8ohm to 4ohms? Any other brands of tweeters recommended for a fullrange driver that is around 96bd efficent? Sorry for all the questions, incredibly new to trying to implement crossovers with full rangers. If this sounds like a bad idea. Please speak up.
- ...
- 52 posts total
I appreciate the feedback from everybody. Why I would love to try both the magnats and the enigmacoustics, I'm going to work with some fostex t90a's at first to see if I like what they add. If so, I will upgrade at somepoint, so thanks for the advice on those. I'm trying to cross my tweeter over around 15khz, wouldn't a .33uf capacitor be ideal, in a 1st order filter? Considering the 106 db on the fostex, and the 96db for the fullrange. |
ENIGM Acoustics Sopranino electrostatic supertweeter Never seen these before. Wow! killer load for an amp, like most esl’s in the highs. https://www.stereophile.com/images/614EnSopfig1.jpg "Sopranino’s magnitude increases with decreasing frequency. However, with the 8kHz filter setting, there is a very high inductive phase angle between 7 and 12kHz, a region where the impedance magnitude drops to less than 2 ohms. This makes the Sopranino very difficult to drive at this setting"Cheers George |
Makes super tweeter load very mild for amplifier. For example if you use Fostex T90a and you need align it with speaker sensitivity 97dB. You connect T90a to -9dB tap. The super tweeter load that see an amplifier is 64 Ohm. You must put HP filter before autotransformer. You can use potentiometer in parallel to autotransformer input for adjust cut off frequency. |
- 52 posts total