Those Saluda River stands DO look nice. I'll check them out. Thanks.
Equipment Rack - How important in the grand scheme of things?
I have a fairly nice system ($25K or so invested) but I am currently using a cheap rack bought off ebay (1/2" glass shelves with plastic cylinders between the shelves). My amp is sitting on a granite slab (left over from kitchen remodel) on carpet. My system is all solid state with no turntable. My rack is sitting on a tile floor over concrete slab.
I realize that "everything matters" at least a little, but the question is - how important is the quality of the equipment rack compared to other upgrades I could consider? Have those of you that have switched from a cheapo rack to a nice one noticed much improvement (particularly with SS systems and no turntable)?
On a related note, one of my local dealers sells Solid Tech racks. Anyone with experience with these racks?
Thanks,
Jay
I realize that "everything matters" at least a little, but the question is - how important is the quality of the equipment rack compared to other upgrades I could consider? Have those of you that have switched from a cheapo rack to a nice one noticed much improvement (particularly with SS systems and no turntable)?
On a related note, one of my local dealers sells Solid Tech racks. Anyone with experience with these racks?
Thanks,
Jay
- ...
- 43 posts total
I have entered a direct link to my system to make it easier to view my particular audio stand example. Mike will make a stand according to your dimensions. The unit is very heavy and inert. I measured every surface and angle myself on the finished unit. Every dimension is exact. Note the side openings make for adequate ventilation. A brief note Mike sent me early in the process to indicate that no detail is overlooked in the building of his stands: "One of the things I do that is different than any other wood stand builder is I not only notch the supports ( which is all the other guys do) I also notch the shelves. So they lock together." ...and also, "I use only dyes, no stains, I use only alcohol or waterborne finishes. Please be very leary of any audio stand that uses oil-based finishes ie, lacquer, they can color the sonics of your system, and never for the good." You can easily spend $5K or $10K for a stand of this quality if you can find one on the same level. You can even spend many multiples of this on a Stillpoints or HRS unit. However, why pay for marketing with little or no demonstrable sonic benefit over the Saluda River Audio Stand? The beauty of the stand is quite something. My wife has absolutely no interest in anything audio. However, when she saw the finished stand she was as happy as I was and could not stop looking at it. She is actually encouraging me to order the matching amp stands so as not to waste the remainder of the custom dye color Mike has remaining. Here is my Audiogon system link: https://systems.audiogon.com/systems/8501 I hope all this helps! . |
Hi! The stand was $1995.00 for a five shelf unit measuring 24" wide x 18" deep x 44" in height. The vertical spacing is 8 " above each shelf. I chose the dimensions and Mike confirmed with a line drawing on graph paper e-mailed to me. He never made a 5 shelf vertical stand prior to mine. He had to construct special gigs for the spacing of the many notches involved for mine. Regarding the cost: $400.00 of this was for the custom color dye he had to mix for the exact shade I wanted. A standard dye would be much less. He only charged me $50.00 for personal delivery to my home. I mentioned photo progress: Mike even e-mailed me pictures of the raw wood maple boards he picked out at his lumber supplier before he began building the stand. Mike's customer service is exemplary as is the quality and care of his finished product. i hope i helped you to make a fair decision. |
- 43 posts total