2. speakers
  3. 1297122476

Kef 205/2

Good Morning All!

My setup consists of:

Kef 205/2
Mcintosh MC501's
Audio Research Ref 3
Fully Mod Primare CD31
PS Audio PPP (CD, Pre)
Shunyata Hydra 2 (Amps)
Nordost Quattro Fill CD to Pre
Nordost Red Dawn Pre to Amps
Nordost Red Dawn Bi-Wired Speaker cables
Analysis Plus Oval 9 Power Cords

My current issue with the above setup is that the Kef 205/2 produces very little bass comparing to my smaller system (in the same room with the same speakers positioning , etc) which consists of Dynaudio Focus 140 bookshelf, Cambridge Audio 740c and Meixing integrated tube amp (75w/ channel)! Due to the lack of bass, my main system seems to be brighter. I’ve tried to play the Kef on my smaller setup but the amp seems not to be to drive them.

Has anyone experience with the Kef205/2 or similar setup?
Can you please let me know how to improve the bass response?
I’ve tried with cables e.g. Chord Anthem, Cardas Golden Cross with mix result and ended with Nordost due to their high resolution. I do believe make differences but not substantially

Thanking you in advance for your advices
Primare_Cd31
primare_cd31
pkoh70
34 posts
 
hmm, 205/2's got prettty good low bass that integrate well with rest of the freq. I almost got 205/2 before settling with 207/2. I would suggest some cabling tweak. Nordost cables you are using won't help you with the bass problem. In that price range, I recommend JPS superconductor or audioquest line. they match well with KEFs. Make sure you have speaker freq. plugs on the back setup properly. (highs flat and lows flat as well).. The dyns are probably giving you more bass, not in the lowest bass, but in upper bass region and they are harder to control so the bass may be loose as well which will make you think they got more bass. believe me, 205/2 will definitely give you more tight, clean bass down low with the system you have. Enjoy playing around and don't give up on them yet.
pkoh70
34 posts
 
One more thing, you definitely need to change the quattro Fill going from your CD to Pre. you have an interconnect that is going exactly the opposite way from where you want to go and CD to Pre is where the most signifcant change in sound will be made through cable change..my two cents..
primare_cd31 OP
66 posts
 
Thank you all
I'll give it a go through upgrading cables. I have in mind the following
Acoustic Zen double barrels speaker cables
Acoustic Zen silver Ref ICs
Or
Purist Elementra
Or
Maybe Transparent

Anyone experience owith Grovers cables?
primare_cd31 OP
66 posts
 
Pkoh70, with all plugs remove. Will it also reduce bass response? I tried with high freq plugs removed but ended up with replug due to loosing resolution!
What cables are you using on 207/2?
Thanks
gshepardbuster's avatar
gshepardbuster
620 posts
 
I had a similar beef with my 800d's powered by a Mc 500, which is 2 channel by 500 watts. All seemed well except the bass seemed lean. I was using monster biwire with monster balanced ics from my original system of the 90's. I always felt cables are important but as more of a tweak opposed to spending mucho denaro. I went ahead and tried some audioquest with the solid core copper. The Aq's vs.stranded monster were much better, there was the bass, and everything else you should hear. My gut tells me your nordost cables (which are great cables) are wrong for your application.
More to discover