Speaker crossover mod. Your advice?

Hi Louk - I have the same speakers that you have, the 1027be.

I'm not sure I understand your question. Are you asking about the crossover, the drivers, or the enclosure?

Bryon

Hi Bryon,

in your first post on top you wrote in the first sentense: "I'm considering modding the crossovers of my Focal 1027s".
So I thought you have the 1027 S version. Then this is a misunderstanding of me. I was questioning for the differences of both (BE and S version) to adapt the midrange design of the 1027 S to the BE. This is supposed to be more present than on the BE and results in a more round and warm sound. But since you have also the BE, you can't answer my question. What a pity.

louk

I haven't read all the posts, so- someone may have already mentioned the sonic benefits of observing the directionality of film caps. Most of the better ones are marked, in some way, as to which lead is connected to the outer foil. Good tips, especially(in your case) point three, here: (http://www.audience-av.com/capacitors/a_applications.php)

Louk - The "s" in the first sentence of my post was simply meant to be plural, as in "my Focal ten twenty sevens." I had forgotten that Focal made a speaker designated 1027S. Sorry for the confusion.

In any case, I do indeed have the 1027be, and I can say that I don't have the same problem in the midrange that you are describing. I don't doubt what you are hearing, but I wonder if there's an issue elsewhere in the system. I have found that the 1027be is rather revealing of issues in upstream components.

Bryon

Hi Bryon,

before I got the 1027 BE I did have the Trent II from Castle, a wonderful sounding little loudspeaker combined with an Infinity subwoofer. Not that perfect as the Focal but not so far of it. For the price, absolute high value. If I compare the 1027 BE with the Trent II and with other loudspeaker, the midrange is to thin. Also my ear is missing some pressure in the mid (voices and some instruments). Clearly it may also be a matter of taste, but I don't beleave, that it is only that. Maybe they changed something in the series. Which midrange chassis is built in your BE (my is as stated 6 W 4361)? The serial number of my BE is 10A 000 115, but there is nowhere a date of production.
One point but very unlikely could be, that the mid chassis has a lost of efficiency. Electrically I could not find a problem. I did wobble the voltage at the mid with a tone generator and checked the wave with an oscilloscope. Below 2kHz it gets a maximum of 80% amplitude of the crossover input. The impedance of the mid is 7 Ohm, I expected 8 Ohm, but I have to verify that with a better multimeter.

louk