Preliminary DIY Grounding Box Result

Most people would generally be much better off if they believed in too much rather than too little. - P. T. Barnum

An ordinary man has no means of deliverance. - old audiophile axiom

Lead, follow or get out of the way! - Ivan the Terrible

There are places that the road doesn’t go in a circle. There are places where the road keep going. - Geoff Kait

OK, I just decided to "Play" with this concept. Anyone one have an idea of the (best?), mineral mix and the percentage by mass to be used? Other than Quartz, Tourmaline, Magnetite and Iron Ferrite granules?

It sounds like they all need to have similar properties. In that each component is reactive in some way to an areas "specific", magnetic field. Kind of like your making, just dirt. Yet a dirt/soil without the non-reactive components. "Dirt on steroids"! Placed inside a sealed, solid wood paneled box. With a minimum interior size of one square foot. Then an audio,- RCA, IEC, or other similar connector bonded to either copper coil/s or Copper/silver foil as the electrode. The electrode then terminating in the center of the strata of medium used.
   Hee hee hee, am I missing anything else here, besides my mind?
 And If I "then", placed the box near a dedicated ground buss and bonded it to the....

 But seriously, I have everything here except for "all", of the minerals already. So I shall attempt this. Off to the hardware store for dirt components!

Tomask6? How did the quartz work out for you? I have picked out eleven different mineral elements. Each chosen for it's properties in relation to a, "Possible", interaction with the surrounding area's ambient and, "static", fields of charge. I have several varieties of quartz now. Sized into different mediums. Tourmaline also.
 According to this very nice gypsy lady I met this week...
Quote; Pink Tourmaline is a crown chakra stone, and Blue Tourmaline is a throat and third eye chakra stone. Black Tourmaline is an effective blocker of negative vibrations and psychic attacks. It’s a highly protective stone that will pick up on any disharmony in your environment. It will transform this disharmony into peace and serenity.
    Ha ha ha ha, not real sure that I'll incorporate any of, "That", into what I am attempting to do here. This is all just a.shot in the dark right now to me. "Right now". But too many people are hearing a difference to discount it completely.  I was looking at a, "Nordost", ground box earlier. Those have an aluminum case.
 I built two from Rock Maple, 10" x 16" x 9" deep. One I shielded and damped in several layers just to see if any isolation will make a difference. "I'll measure everything against my baseline  Which is a rig in the next room. The second box is I lined with some 3/4" Red Cedar only. That should help with any critters piggybacking in on my synthetic dirt! And give me another box to measure against the first one. The wire topology will be the same in both.  As a control.
Does anyone here, "have" some type of this "Ground box" as they call it, device already? And maybe willing to share their experiences with it?  And if so Have you/they ever tried to see a difference not in sound. But say, In the resistance across the end leads of the wire. Before any wire enters the box. And then across the leads from the connection at the ground box itself entering it. and again where it exits the box? Or maybe looking at the information moving through the wire, "Again in the same two exact area's". With a scope, Oscilloscope or other instrument of measurement. Along with maybe a tone generator?
OR any other type of measurement, reading ect.? Which may be of help?
 I have a plethora of equipment at my disposal and will measure, test and read myself. But I was just wondering if someone has any info that could save me some, headaches/dead-ends etc??

Ok, Both "boxes" are now insulated, damped, double/ triple shielded.   
With all sides bonded including the top.
Shielding is achieved with aluminum and copper foils bonded with copper wire. Electrodes will be 1/4" thick, 2 x 6" pure copper bus bars. Which will be held aloft into the center of the mineral mediums by ceramic insulators 3" tall inside each box. Bus bar bonded back to the outside of the case with WBT copper binding posts. Mech. welds are used for all bonds. 12awg silver plated copper used for all wiring.


All minerals listed on the earlier posts soon to be added to the interiors with the addition of a mineral named, "Shungite", a known source of "Fullerenes". The known natural construct with the property of superconductivity. Which fits in nicely with the other minerals and their own odd, "Stasis charge" qualities of a very positive photonic nature.

I plan to induce a polarity with niobium magnets. We'll see!

Can anyone else see the virtual construct this seems to be leading itself into? A copy of something much larger. With "Hyperreactive" strata condensed into a very small package.