Thanks, I kept my original drive just in case plus maintain a running backup of the data in case I need to change out the drive.
Aurender N100H Mods
The fact that Aurender runs Linux makes changing the system difficult but I have managed the following.
Convert a 220v unit to 110v for US service and back the other way is relatively easy. A few wiring changes.
Upgrade boot and SSD music cache from 120GB mSATA to faster and larger 256GB mSATA is possible but not for the novice.
Upgrading 2TB HD to 4TB now. 2TB units have their 2nd drive pins omitted so to go larger you can’t add a second drive. Need to replace the smaller drive with a larger one. Needs to be formatted or cloned to conform to Linux.
Convert a 220v unit to 110v for US service and back the other way is relatively easy. A few wiring changes.
Upgrade boot and SSD music cache from 120GB mSATA to faster and larger 256GB mSATA is possible but not for the novice.
Upgrading 2TB HD to 4TB now. 2TB units have their 2nd drive pins omitted so to go larger you can’t add a second drive. Need to replace the smaller drive with a larger one. Needs to be formatted or cloned to conform to Linux.
- ...
- 17 posts total
I used a Linux based program to clone the partitions and content. I believe it was a program called GParted but there are several. I think Clonezilla May also work. The key is Aurender is running a Linux based system so you need to use a Linux program to clone or a Windows based program but it needs to be able to clone a Linux system/partition. Mine had three partitions. What’s great is it’s easy to test. If your clone boots up it’s good to go. Sometimes you need to play with cloning parameters. |
I will use the following clone dock and hope it work Automaticallyhttp://www.orico.cc/usmobile/product/detail/id/6892.html |
- 17 posts total