Dedicated 20 amp circuit - Electrician laughed!


I brought my electrician out to my house today to show him where I would like to install a dedicated 20a circuit for my system.  He laughed and said that's the stupidest thing he's heard and laughs when people talk about it.  It said, if you're going to do it, you have to have it separately grounded (shoving a new 8 foot rod into the ground) but even then, he sees no way there can be an audible improvement.

Now, he's not just an electrician though. He rebuilds tube amps on the side and tears apart amps and such all the time so he's quite well versed in audio electronics and how they operate.

He basically said anyone who thinks they hear a difference is fooling themselves.  

Personally, I'm still not sure, I'm no engineer, my room's not perfect, and I can't spend hours on end critical listening...  But, he does kinda pull me farther to the "snake oil" side and the "suggestive hearing" side (aka, you hear an improvement because you want to hear it).

I'm not taking a side here but I thought it was interesting how definitive he was that this not only WILL not make a difference but ALMOST CANNOT make a difference. 
dtximages
Post removed 
heaudio123
Dont waste your breath here too much.  Too many know it alls but very few real engineers.  Cheers!!
Hi Dtx

I had a dedicated line with 14 AWG wire that I recently upgraded with a 8 AWG line and noticed very positive differences.  I followed the advice of Vince Galbo of MSB (see the article here: https://www.msbtechnology.com/faq/how-to-wire-your-house-for-good-power/).  He seems to know what he is talking about. I was using  a Synergistic Research PC 12 SE conditioner and an Active Ground Block SE and still was able to improve on the sound.  His article is very comprehensive and I can confirm his findings.  The only thing I did differently is using Perfect Path Technology Total Contact instead of his recommended Silver Paste.  Hope that helps.
Post removed 
tvad
What duplex outlets did you install? Many duplexes are limited to 10 awg wire (8 awg is too large).
That's very true. I use 8 AWG on some of my dedicated outlets and used a pigtail to connect to the receptacle.