Looking for an integrated amp around 4000 to 5000.


I am currently looking to upgrade from a Rogue Pharaoh integrated. I have Ascendo C8 Rennasance speakers 88  DB. 6 ohm. PC to Wyred4sound DAC 2. Looking for some input on others experience. Considering Levinson 585 or Primaluna EVO 400. I need a line out for a sub. Prefer a balanced in but that is not a deal breaker. I welcome all recommendations.
Ag insider logo xs@2xpal
I personally owned these speakers. I tried close to a dozen amps on them. Damping factor on these specific speakers matter. The inside bass driver is slower then the mid and you can hear it with a first rate source unless you get them dialed in just right. That is my experience. Other may differ or not agree. I’m just trying to help the guy. 
Yes damping factor for the most part is not super important but it certainly is when you have a speaker that needs it and badly. 
I wasn’t using cheap amps either.

The best I settled before Soulution was ARC 250 SE which I thought was great until I heard the Soulution.

I am not recommending a Soulution amp. I use a Stage III Kraken power cable on it that cost much more then the Ascendo’s do but trust me get a good amp that has a high damping factor. 
Now if someone else chimes in that owned these speakers and they worked hard like me trying all kinds of different amps to get most out of them then great listen to them but people that have not owned them and don’t know these unique German speakers just ignore them. 
djones51 
I didn’t even read your link. I owned them and worked hard to mate them. Some article / white paper will never compare to actually owning and then spending tens of thousands to properly drive them. 
I actually am trying to help the guy rather be a contrarian. I have not posted on here in a long time but thought the op could benefit from my personal experience. If not no problem but people should actually try help when they can. 


 Well if damping factor is what you're worried about get a used a Crown Studio Reference it has a damping factor > 40,000. There have been a lot of good suggestions within the OP price range.
Hello,

I’m curious as to what it is about your current Integrated that you don’t like or why you feel you need to change?

We have a solid state unit that can give you more flexibility than most Integrated Amps at any price range.

It has a ton of performance and loaded with delightful features.

Connect it to your router and download our Control App to use from any mobile device.

It also has:
  • High-resolution preamplifier section
  • High current, high output amplifier section
  • Amplifier uses 8 bipolar output devices per channel, a toroidal transformer power supply, and Advanced Load Monitoring for 200W at 8 ohms, 400W at 4 ohms, 550W at 2 ohms, all continuous
  • Anthem Room Correction (ARC®) optimizes in-room response for perfect sound (Is fully customizable to sound the way you want or let it do its thing and simply correct for room anomalies).
  • Bass management for two subwoofers, in mono or stereo
  • Up-sampling of lower-resolution sources to 32-bit/192kHz
  • S/PDIF coaxial and optical, and balanced AES/EBU inputs
  • Asynchronous USB Audio Input supports 32-bit/384kHz PCM, and DSD 2.8 / 5.6 MHz sources
  • MM and MC phono with fully customizable RIAA Curves and with Presets along with adjustable Rumble Filter, balanced XLR, and single-ended analog inputs
  • Analog Direct mode
  • Graphic Front Panel Display for easy setup and navigation
  • Controllable via Ethernet, RS-232, or supplied IR remote
  • Available in Silver and Black Finishes
  • Crafted in Canada (Made in our Factory in Mississauga)

If you have questions, please don’t hesitate to reach out to me directly and you can use our Dealer Locator to find your closest Anthem Dealer. Always a good idea to call ahead and see who has one on display if you’re able to go for an audition. If you decide to purchase one without seeing or hearing it first, I will mention, it has approximately a 300 hour break-in period.

Retail is $4499.00 and is on sale now for 20% off of that through the end of May 2020. Thank you for your time and any consideration!
Respectfully,
Chris

Here are some direct links to it:

https://www.anthemav.com/products-current/model=str-integrated-amplifier/page=overview

https://www.anthemav.com/downloads/str_integrated_amplifier_datasheet.pdf
+1 for the Mcintosh MA252 integrated. Since it is hybrid design you have the best of both worlds. Tubes for preamp and SS for power amp. Is sounds nothing close to anything from Mcintosh I’ve tried before. More smooth, natural sounding and pleasing to ears.
I had one paired with my Spendor D7 and it was pure bliss. 3.500 Usd MSRP.
Due to the nature of your speakers (88db impedance at 6ohms) you can even think in his big brother the MA352 that doubles the power.