Just confused

I would add a nice rug and just enjoy the music. As you get much more accustomed to the sound and your hearing becomes more astute, you will then to be able to find flaws or not in your system. I wouldn’t blindly throw money at cones, spikes, better cabling and cleaner AC, etc. until you have lived with the system for a while. I would say a good six months unless something really stands out as very annoying. A rug will definitely help, otherwise the room could be too lively and bright.

Most of us here have our own ideas so you will get probably 20-30 different answers or more. The main thing is to have fun and enjoy the music

Try a large enough rug to place under the speakers and far enough in front of them to address first reflections from the floor.

If a smaller rug is the only option...place this in front of the speakers to address first reflections from the floor. Buy some brass footers for your speaker spikes. These are little saucers with an indentation in the center to cradle the spike. I cut out some leather circles to place under the brass footers to prevent the odd buzz from an uneven wood floor.

The most important thing is just to try stuff on your own. Read a couple of good books on acoustics/speakers etc.. This helped me quite a bit.

I’ve just been thru this. Concrete slab floor is great for vibration control. Rubber feet sounded much better than spikes. Might be because it’s hard to get 4 spikes perfectly balanced on concrete with zero movement. They always rock a bit. So, I put the factory feet in instead of the spikes. Yes.  I tried various isolation feet. No. I even tried springs because some people here think that they are the ultimate isolation medium- capable of isolation below 5 hz I was told.  No.  Loss of bass definition.  For acoustic control purposes I decided to put down carpet and pad along with other room treatments. Yes. Huge improvement.  But, I felt the bass definition could improve. Back to spikes thru the carpet and pad. Yes! I’m very happy.  And they don’t rock at all. I can’t explain that part. Carpet shouldn’t make a difference when I know the spikes go all the way thru. That has been my experience in my room. I’m not saying I think my way is what you should do. I think every room and system is unique. I had fun trying things and seeing what worked. I hope you do too. If I spend too much more time isolated in my house I might go crazy and try bolting the speakers to the floor.  🙃

I wouldn’t spike anything to concrete/tile. I use Herbie’s Audio Lab sliders under my speakers on ceramic tile they work great and you can tweak your speaker position much more easily. 

vinylfan62
I even tried springs because some people here think that they are the ultimate isolation medium- capable of isolation below 5 hz I was told. No. Loss of bass definition

>>>I actually don’t believe you. Springs would only work directly under relatively lightweight speakers due to center of gravity issue. And you would have had to match the spring rates to the load which I doubt you did. For speakers you don’t need to get down below 5 Hz because the speakers don’t produce any frequencies below 20 Hz. The objectives of speaker isolation are different than for components - for speakers you’re preventing mechanical feedback. If you tried to achieve a Fr of 3 Hz for speakers the springs would have to be so “floppy“ the speakers would fall over. And if the springs are too stiff they won’t isolate effectively. I suggest we write this off as operator error.