Hi Everybody,
About a year ago, I posted about a problem I was having with my Thiel CS
3.0s that had not been used for many years.
The soundstage was off and it seemed to follow the speaker. It wasn’t obvious whether it was the
crossover, midrange, or tweeter. Well,
after a lot of help from Rob Gillum at Coherent Source Service, I was able to
determine that it was the tweeter. I
also verified that the 36-year-old crossover was in great shape and all of the
caps were in spec.
The rest of my system now consists of a PS Audio PWD II
w/bridge, Dodd battery tube preamp, and a Pass X150.8 amp, which replaced a
pair of ASL Hurricane tube monoblocks. My
acoustically treated room is small (11’ x 16’ x 10’) so I’m not using the bass
equalizer. I also use REW room
correction software. After installing the tweeter that Rob sent, I think that my CS3.0s sound amazing, especially considering
the fact that they are 36 years old and 5 of the 6 drivers and the crossovers are
original.
I also wanted to thank whoever brought up the OCOS speaker
cables earlier. I have a 30-year-old triple run
pair that I wouldn’t have considered using had it not been for this thread. I installed them and they are definitely better
than the off-brand cables I was using. I
guess that I’ll have to throw in the Magnan Vi interconnects next 😊
I was trying to find a pair of 2.4s but the 3.0s sound good
enough for me for now.
Thanks again everybody,
utrak