Direct Drive vs. Idler Drive vs. Belt drive

I respect all drives and am adamant they all have there strength and weaknesses. All have the ability to play quietly and appeal to the INDIVIDUAL'S preferences of what THEY believe is right for them. All of you that are biased closed minded to ownership not only ignore strengths , popularity, but embellish all faults of each in a general broad attacks not serving the truth to the improvements specific brand and model have.
Many inverted quality bearings in design and applied with a weighted platter show zero horizontal pull much less rubbing the spindle. General statements of ignorance not fact are common with all biased ownership rants. There were and are are an awful lot of horrible DD tables made not just the very very few better ones. Something few of you immerse in the generalized opinions paraded as facts.
Same as many belted units are sub par but far from all and idlers do indeed have a need of massaging out self noise. 

The final sound followed by users visual appeal is all that's important. Not what one or two gregarious opiners of one drive think here. Like when specs are brought up and championed, yet the fudging of how those numbers were done in Japan, a well known fact is left out. (Weighted )

Vinyl is a great medium for those that appreciate it and what it can bring to music. Bashing users like Rega owners who like the prat and prefer simpler less fussy of plug and play is childish. It would seem to me, inclusiveness would be a better way to respect choices and to learn. Being that guy that can only praise what he owns and shade anything or anyone else that doesn't fit their narrow view and generalized ignorance is killing interest and the participation in these forums.

It's not a simplistic obvious fact which is better. Its a choice in preference of appeal to tone and timbre, degree of difficulty and ability and willingness to achieve it ......and like it or not estetics are a key to most for appeal as part of the draw. I find it amazing what some have done and produced in all drives to better the playback and reduce drawbacks. The negative biased drivel of anything other than what one narrow mind owns here. ...not so much. Enjoy the music, respect the individual and his choice....after all. ..its opinion in the end..

Miyostin,
you are right comparing air bearing and magnetic designs.
nevertheless what counts are bearing hardness, batch braking moment and energy transmission by the bearing.

E.

has2be

I was merely (re)stating an inherent advantage of a DD design with respect to its bearing, after all the OP has asked this.....
"I'd like to know your thoughts on the strengths and weaknesses of each drive system"
I did not say that overall DD is superior. 

An inverted bearing is inherently more stable, on that I hope we agree?
My comment about the shaft finish is simply engineering 101. In the outside world it is common to not polish a sleeved oil lubricated bearing. This for the reason I raised. I know of one, possibly 2 TTs that use the non polished technique, both have well designed and engineered bearings. . These are the Final Audio Research and the big idler EMT. These TTs have very quiet bearings thru good engineering not bias 

Sure you can remove horizontal pull on a BD  bearing by having 180 degree opposed motors or an idler. That said, one would need to be very careful not to introduce noise into the platter from the second (or third) rotating element.

All TT drives have strengths and weaknesses, there is more than one path to enlightenment. On that we agree. I prefer DD, that is my opinion, others do not. I'm fine with that. 

 My experience is that it is by far the hardest to achieve good performance from a DD design. This because there is no filter between the drive and the platter. Any aberrations in the drive are exposed warts and all. This is particularly difficult if the designer chooses a high motor torque to platter inertia ratio. Difficult but not impossible. 


Cheers 
 

@richardkrebs 

Actually, Richard. Your mistaken in that I was even referencing you or your comments . The only thing I would reply to a polished shaft as a fault would be if rifling was encorperated to draw the oil upwards such as michell does would negate your view of it.
My point was and always is there are more ways to get results than the narrow view of biased ownership. 
Clearly, you don't fall in the blind bias and I know you did not state DD was superior nor did I suggest you did or do. Please reread and you will see whom ALWAYS does as in this thread.
Your last statement on why DD is more difficult to do and although not impossible is fewer than those that don't  was refreshingly pleasing to read.
None of us hear the same either complicating our opinions wrapped in facts that have as many variables changed with design and implementation from one to the next.
Believe me, I certainly wasn't referencing anyone who ever articulated what you last posted. Cheers

has2be

Peace

cheers