What happened to my bass?


Ok, for those of you willing to read a bit, I have, as usual, something driving me nuts. I'm a speaker builder. Current speakers look like Watt/Puppy, consist of 11 inch Eton, 7 inch Scan Speak, Scan Speak Revelator tweeter. They perform very well and I haven't changed anything about them in 5 years.....but I have changed houses and of course rooms. Prior room was twice the size of the current, rather small, living room. Bass was a tad shy in the prior bigger room which was in a basement with a good amount of exposed insulation and floor joists up above. Current room is plaster covered drywall, bass traps in front room corners. Bass is generally quite a bit better in the smaller room and according to my pipe organ tracks, very low bass is no problem. So, finally, to the point. Yesterday I am listening to Bygone Days (Eileen Ivers violin track) and it dawns on me that that track has sounded different in the past. In fact, on second listen, there are bass notes completely missing that I clearly remember. I assume the memory goes back to the prior bigger, bass-shy room! I just don't get it. My sense is that bass is fuller and more balanced in this room on everything else I have listened to, and then I get to this Ivers track and there are bass notes that actually had some growl to them, completely missing? It's really wierd when you anticipate something in music and it has disappeared. Room null? By the way, it makes no difference where I am in the room. I even stuck my head behind the speakers. Am I the only one whose system drives them nuts from time to time?
240zracer
Results from playing Stereophile Test CD #2 frequency tests and measuring db with a Radio Shack meter, listed as freq/db: 20/64, 25/69, 31/73, 40/76, 50/76, 63/70, 80/72, 100/72, 125/71, 160/72, 200/68. Midrange: 250/62, 315/64, 400/68, 500/74, 630/74, 800/74, 1000/74, 1250/71, 1600/71, 200/72. Treble: 2500/74, 3150/75, 4000/75, 5000/74, 6300/71, 8000/64, 10000/56, 12500/56, 16000/56, 20000/50. Crossover points are 250 and 2500. Not very scientific, but I don't see a reason for missing any bass.
Paulsax....I'm doing all this critical listening (which might be a bad habit) because I had the idea of upgrading parts on my crossover boards. I even built a second order crossover with slightly different crossover points in case I might have a nice surprise. Well, the second order crossover points of 200Hz and 2000Hz resulted in some sharp treble that was not easy to tame, and less satisfying bass. So the forth-order at 250 and 2500 seems to be a winner. I have to believe that some production speakers might suffer from bad crossover decisions just like hobbyists. See if you can find a song called "call me" by Hans Theessink. Talk about a nice raspy voice. I have it on one of those Burmester CDs.
Is the stereophile CD 'calibrated' to the RS meter? The meter....at least the analogue needs some corrections to whatever it reads.
The Rives Audio disk has such corrections 'built it' so what it reads, is what it IS.
Thanks, Shadorne. I have some good condenser mikes and will be looking into your software suggestions.
Magfan, you are absolutely right. I didn't know about the Rives CD till about a week ago when I stumbled on it here. And my meter is analog.