2. speakers
  3. 137322-89000

Considering the New Tekton Design Encores? AND Owners Group - Experiences/Questions

I am the very happy owner of the first pair of New Tekton Design Encores and I thought I would create this thread to answer any questions anyone might have regarding the Encore speakers, room considerations, and associated equipment. If you’ve order your pair already, please chime in. I really want to hear what other people’s experience are with these unbelievable speakers.

I drive my Encores with both an Art Audio Diavolo SET 300b Tube Amplifier with 8wpc and I switch in my 700w Nord One-Up SE Monoblocks for non-critical listening and some big pieces of music that benefit from the extra power.



  • Made under U.S. Patent 9247339 with multiple new patents pending
  • Proprietary loudspeaker design
  • Ultra-linear frequency response with ±.5dB deviation from 70Hz-20kHz
  • One single crossover element placed within the tweeter path
  • Ultra-linear, entirely time-invariant minimum-phase mid-range section
  • Proprietary patent pending 15 dome radiating hybrid MTM high frequency array
  • Two 6.5" mid-bass patented ’overtone & harmonic’ transducers
  • Dual 11" low-frequency transducers
  • ​96dB 2.83V@1m sensitivity
  • 4 Ohm design for optimum performance
  • 20Hz-30kHz frequency response​
  • Dimensions Width 13.25" x Depth 15.25" x Height 62"
  • 800 Watt power handling
  • Weight 175 lbs​
128x128jcarcopo
stereo5's avatar
stereo5
6,388 posts
 
While I am sure the speakers are all everyone says they are, they all are just way too ugly to go in my living room.  I could never own them (not that I want them) and I am willing to bet my GE Triton Reference speakers will give them an excellent run for the money.  I am talking about comparatively priced Tektons  
coot
80 posts
 
@stereo5 
Made in America Encores against Communist China Tritons? Yer kiddin', right?
jcarcopo's avatar
jcarcopo OP
504 posts
 
@stereo5  Great, thanks for stopping by. Many people who have owned speakers costing many times the price of the Tektons, own Tektons.  I am one of them.  Reviewers have said as much as well, but I understand since you haven't heard them.  I can only compare them to the dozens of brands I have heard while selling high end, visiting trade shows, or spending time at fellow audiophile's homes over the last couple of decades. If you enjoy your Tritons that's great. 
sedond
1,387 posts
 
jcarcopo - i suspect the tweeters are the same in all these speakers, except for the waveguides being different.  the encore's and the di/se's seem to have the same waveguide, while the ulfberht's and the moab's have the same waveguide.  and, while i'm not sure, i also suspect the spacing has to do with the adjacent woofers/midwoofers.  the smaller waveguide tweeters are adjacent to the single midwoofers, while the tweeters w/the larger waveguides are adjacent to either 12" woofers, or a pair of midwoofers. (or 10"/12"/15" woofers of the perfect set's).

and yes, if you were to build the encores w/a woofer at the top, you would want a taller cabinet; i believe the custom encore i heard about was installed in a cabinet similar to the taller moab cabinet.  of course, you could always raise the cabinets.  years ago, i owned a pair of coincident victory's, (great speakers, btw), and they sounded better when raised ~14" - which then had them mimicking the super-victory's but w/o the additional side-firing woofers.  raising those speakers considerably enhanced the soundstaging, and i'm certain the same would apply to encores w/standard 62" cabinets, but one woofer at the top of the array...  if my calcs are correct, the center of the present encore's middle tweeter is ~44.6" above the floor, or a mite higher if the speaker has spikes or feet.
Post removed 
More to discover