Musical Fidelity X-10 Tube Buffer Stage


Could this actually:

"add the warmth and musicality you crave" for only $399.00?

Or is it just another quirky, overhyped piece of UK voodoo gear?

I have to admit this caught my eye on amusicdirect.com as I still try to tame the high end of my SCD-1, but a recommendation would sure make me feel a bit better before placing the order.

Has anyone tried it? Or any thoughts?
cwlondon
Good to hear , mine has been in my system for about 4 months , as it settles in it will sound even better , im not a big believer in burn in, but with this unit it now sounds different to the first day , it is just more open , well done and let me say to others out there that this unit is far better than the original , i had one so i know. Cheers.
install the device on a tape-loop of your SP11 pre. This way you won't have to suffer the additional degradation of that extra interconnect cable-pair when the X-10 is switched out, &/or you can buffer additional source equipment as desired. Bear in mind that the extra cables inline with your signal are a significant limiting factor; quality & synergy are both very important factors.
Bob Bundus

Record out to the X-10? And then "monitor" through the tape loop?

This will still require 2 sets of cables to the buffer but I guess just one coming off the SCD-1 which is better in your opinion?

This should also make for some easy and interesting A/B comparisons?

Thank you.
I see Music Direct is offerring the trifecta for $1299 (Tube buffer, DAC, power supply). It is very tempting.
Hi CW yes you have correctly understood my suggestion; however you also correctly point out that the signal would be inline with yet another interconnect cable pair, only 'when the buffer is inline'. This may not be the best configuration - if you typically have the buffer inline *most* of the time then you'd probably be better off not using the tape loop. But again yes, the switching arrangement does then allow for easy A/B comparisons.

I don't really have an opinion re "which is better" the only answer to the question lies in experimentation. Cable quality & synergy are certainly limiting factors; try it both ways if possible.

There may be some other ways to 'tame the SCD-1's high end' have you experimented with:
(1) the interconnect pair
(2) the AC cable (on the player & on the pre & PA)
(3) tweaks such as shelving, cones, footers...
(4) AC line conditioning