Bi-Amping with one amp?

Thanks N80, but this is the speaker wiring. What I am referring to is the wiring from the dac or preamp. 

I had a pair of Nautilus 802's powered by a Pass Labs Aleph 5 60 watt stereo. I got another identical Aleph 5 for cheap. Nelson Pass tells me there's no way to use them as monoblocks. So I ran cable from right channel to the woofers and left channel to the mids and tweets. 2 separate cable runs. Same with the other speaker. Only drawback is the channel powering the woofs is doing 90% of the work. So I'd swap the channels once a month. This is called passive bi-amping as the crossovers are still splitting the signal. Active bi-amping is when you have an electronic crossover and it sends signals to dedicated amplifiers. This is almost never done in the home audio, but its done at every rock concert you've ever been to. Good for high sound pressure levels.

" Active bi-amping is when you have an electronic crossover and it sends signals to dedicated amplifiers. This is almost never done in the home audio, but its done at every rock concert you've ever been to. Good for high sound pressure levels. "
  Active bi-amping is more common than you might think. I happen to be one of them who does this with a Xilica XP3060. It is a PITA to get started with but once learned allows you to fine tune anything. I won't be using passive crossovers in my personal system ever again. On the Klipsch forum there are a number of people doing this and you can search there for what they have done and the results. If you want the very best your components can deliver going active will allow you to do this.

...4 channels... only if the speakers you're hooking them up to have connections for bi-wire on the back.