The rear of that Denon says A or B 4-16 ohms and A and B 8-16 ohms. If you are using one pair of 4 ohm speakers there is no problem!
Denon POA 1500 To drive 4ohm 86 dB Dynaudio 42se bookshelves
The rear of my Denon POA 1500 has an impedance of between 8-16 ohms yet the Dyn's are 4ohms.The Dyn's are a temporary option until I have my other speakers. I don't play at high volumes but need to check the risk involved. Suggestions welcomed
Thank You
Thank You
- ...
- 6 posts total
Not on this one. The rear is labeled speaker A or B 4-16 ohms. Could they have changed that on the one that you have? https://img.canuckaudiomart.com/uploads/large/385147-21acc70f-denon_poa1500_power_amp.jpg |
You don’t have to take a picture. If the 230V version says to use 8 ohm speakers then you should only use 8 ohm speakers. You can give it a try and see if the amp does not shut down. Here is the owners manual! http://revintages.com/download/04_Denon_POA-1500_Operating_Instructions.pdf |
- 6 posts total