2. analog
  3. 140043-486

Hear my Cartridges....🎶

Many Forums have a 'Show your Turntables' Thread or 'Show your Cartridges' Thread but that's just 'eye-candy'.... These days, it's possible to see and HEAR your turntables/arms and cartridges via YouTube videos.
Peter Breuninger does it on his AV Showrooms Site and Michael Fremer does it with high-res digital files made from his analogue front ends.
Now Fremer claims that the 'sound' on his high-res digital files captures the complex, ephemeral nuances and differences that he hears directly from the analogue equipment in his room.
That may well be....when he plays it through the rest of his high-end setup 😎
But when I play his files through my humble iMac speakers or even worse.....my iPad speakers.....they sound no more convincing than the YouTube videos produced by Breuninger.
Of course YouTube videos struggle to capture 'soundstage' (side to side and front to back) and obviously can't reproduce the effects of the lowest octaves out of subwoofers.....but.....they can sometimes give a reasonably accurate IMPRESSION of the overall sound of a system.

With that in mind.....see if any of you can distinguish the differences between some of my vintage (and modern) cartridges.
VICTOR X1
This cartridge is the pinnacle of the Victor MM designs and has a Shibata stylus on a beryllium cantilever. Almost impossible to find these days with its original Victor stylus assembly but if you are lucky enough to do so.....be prepared to pay over US$1000.....🤪
VICTOR 4MD-X1
This cartridge is down the ladder from the X1 but still has a Shibata stylus (don't know if the cantilever is beryllium?)
This cartridge was designed for 4-Channel reproduction and so has a wide frequency response 10Hz-60KHz.
Easier to find than the X1 but a lot cheaper (I got this one for US$130).
AUDIO TECHNICA AT ML180 OCC
Top of the line MM cartridge from Audio Technica with Microline Stylus on Gold-Plated Boron Tube cantilever.
Expensive if you can find one....think US$1000.

I will be interested if people can hear any differences in these three vintage MM cartridges....
Then I might post some vintage MMs against vintage and MODERN LOMC cartridges.....🤗
128x128halcro
dover
2,265 posts
 
@halcro 
So on the usual macair/airbuds

Sapphire appears initially more resolving on both pieces of music.
Ruby cantilever is awful - splashy top end and lacks definition from the midrange down. Weavers on the Ruby is unlistenable. Orchestral less so.

Now in terms of Boron vs Sapphire, what I hear is more resolution with the Sapphire cantilever, particularly in the lower treble and up. It appears to be more articulate and resolving of air.

However - the Boron has a more developed upper base and midrange - I know the Weavers album well - to my ears the voices are better resolved on the Boron, you can hear more chest, body and weight of the individual singers. The sapphire loses gravitas and resolution on vocals here in the lower range.

On the Weavers the Boron aligns more with what I hear in my system, particularly in the vocal area.

I am not familiar with the cartridges, but is the Boron SAS stylus profile a different profile from the other NeoSAS on the other 2.

From my own experience I have had the Talisman B ( Boron ) and Talisman S ( Sapphire ). The Talisman S has more resolution overall with no downsides - midrange has both weight and resolution.

PS Did you forget to feed your dog again.






halcro's avatar
halcro OP
2,664 posts
 
Wow @dover .......
Simply Wow 🤯
Your ears should be left to Auckland University upon your demise 👂👂

Strangely enough, after recording the Sapphire Cantilever....I preferred it to the Ruby (which I had previously had attached) and so have left it installed.
I am seriously impressed...🤩

Yes...the SAS stylus is the same profile on all three.

PS Did you forget to feed your dog again.
Hahaha.....Princi had just been fed so he left his 'station' in the Dining Room (waiting for dinner) to join me.

Thanks for your impressions.
I'm staggered that the YouTube audio quality allows you to hear these qualities.
lewm
13,335 posts
 
With some trepidation, because I so respect Dover and Halcro, I ask is it not the case that so-called "ruby" and "sapphire" cantilevers are one and the same material?  That doesn't necessarily mean that a given sample of one must sound the same as a given sample of the other, because length and shape of the cantilever and stylus shape and method of bonding could dramatically affect the outcome of any comparison.
Ag insider logo xs@2x
rauliruegas
13,109 posts
 
Dear @halcro  : "" 
Can you actually hear the differences between cantilever materials....?
My answer.......I'm not sure 🤔

The reason I'm regularly asked this question is because I've often written that I prefer Beryllium to all other materials.
This is no accident.....
.I have discovered that the majority of the 80+ cartridges that I LOVE.....seem to share Beryllium as their only common feature.
On the other hand.....the cartridges that disappoint me the most, seem to share Boron as their only common feature.  ""


Well, not only you but any audiophile with a decent room/system should be abble to listen the differences between cartridge different cantilever materials. 
Listen experiences of different cantilevermaterials in the same cartridge is a rare opportunity for some of us: as the Jico ruby/sapphire/boron .

In other thread J.Carr was very specific answering the question : which more important the stylus shape or cantilever?. His answer was that cantilever always makes a higher difference than cartridge stylus shape. That was him.

In the other side and as cantilever material beryllium  is way inferior to boron or diamond in that specific job where we requires  high stiffness with non-self vibrational/resonace at all..Here you can read facts that tell you that boron is superior to the beryllium:

https://www.engineeringtoolbox.com/young-modulus-d_417.html

beryllium elasticity modulus: 287


http://biotsavart.tripod.com/bmt.htm

boron: 400.   Way superior

https://www.azom.com/properties.aspx?ArticleID=591

beryllium hardness: 3800

in the boron link you can read:  9800.

Tensile strength:

beryllium: 800    boron: 3100


Halcro, this is at least the third time that I post those facts about in other threads where you participated and is a little funny that till today you just can't learned on that specific subject.

What you prefer means nothing other that that is what you like it. What it count here is which is better cantilever material and facts are facts like it or not.

@lewm , yes you are rigth both are same material: corundum, with different color.

No one can question that Diamond and boron are the ones for cartridge cantilever as a material characteristic facts no matters what.

Regards and enjoy the MUSIC NOT DISTORTIONS,
R.
sdrsdrsdr
196 posts
 
@rauliruegas 

I think I remember reading that you had owned both versions of Audio Technica AT-ML180, the boron and the beryllium. OFC and OCC. Do you recall how they differed  in sound?
More to discover