If you're into DIY you could build this from cast concrete and sand very affordably https://systems.audiogon.com/systems/8367 Outstanding performance. Or you could use these springs https://www.amazon.com/Nobsound-Aluminum-Speakers-Isolation-Amplifiers/dp/B07K9ZYP84 with just about any rack. Or look for a quality rack that incorporates springs into the shelves.
Best sturdy floor rack for turntable
Hi guys
i own a Brinkmann Balance tt that until recently was mounted on a wall shelf and sat on a granite slab (the granite slab being recommended by Brinkmann).
For (sad) aesthetic reasons I’ve had to lose the wall bracket and the tt will have to slum it on a floor rack.
Is there anything out there that gives good isolation from the floor (wooden floorboards under carpet) ?
I can sort out the mechanical vibrations with a variety of options such as HRS etc but the main problem I foresee is getting something that isn’t intrinsically wobbly....
Needs to be readily available in UK so esoteric stuff in the US unlikely to be much use !
cheers 👍
i own a Brinkmann Balance tt that until recently was mounted on a wall shelf and sat on a granite slab (the granite slab being recommended by Brinkmann).
For (sad) aesthetic reasons I’ve had to lose the wall bracket and the tt will have to slum it on a floor rack.
Is there anything out there that gives good isolation from the floor (wooden floorboards under carpet) ?
I can sort out the mechanical vibrations with a variety of options such as HRS etc but the main problem I foresee is getting something that isn’t intrinsically wobbly....
Needs to be readily available in UK so esoteric stuff in the US unlikely to be much use !
cheers 👍
- ...
- 10 posts total
- 10 posts total