Absorb or Diffuse Behind Listening Position?

Hey folks. Of course I’m working with compromises here. To start with, the compromise is the room: only a "semi-dedicated" listening room; lots of glass; a good bit longer than it is wide; a pair of glass french doors flanking the wall behind my listening position. The system is on the long wall. I’ve talked this through with the speaker designer and we decided that long-wall placement is best, but didn’t completely suss out the rest of the room treatment. Next, the speaker manufacturer’s geometry of 1 (speaker center to center) x 1.18 (perpendicular speaker plane to listening position). If I set up the system on the short wall, paying attention to how near the speakers are to the corners, I might only be 6’ deep in an 18’ long room with a sofa, rather than a listening chair as the center of attention. These speakers are supposed to placed as near to the wall as possible to take advantage of bass boundary-loading, and I’ve put a 2’x4’x2" mineral rock filled panel behind each speaker-pair (I have two pair of monitors spaced and inverted on each other, as recommended by the designer). So the wall behind me - in this semi-dedicated listening room - is the main issue. I’m not far enough for diffusion and more absorption panels might be too dead. I’m setting up some adjustable curtains to take some of the heat off the back wall. Surprisingly, bass problems aren’t that awful. Not sure why. It’s the high-mid and over-bright high frequencies which I’m working to damp at this point. One side wall is good, another is a bit reflective and will probably need something. Ceiling will come last if still needed. Thanks for all the input!

What is your RT-60 ?

6.5 seconds.  But I was faster in college.

To answer the question you actually asked -- I repeat -- try something like the ASC Matrix Panel or RPG BAD panel. They are made for the application. The GIK Alpha line might work, too, but I’ve not tried it in that application (very close to the listener).

Unlike "real" diffusers, you can speak right into these products and not get phasey or unpleasant sound. And unlike broadband absorbers, they don’t create acoustic dead spots. If you are going to sit near the back wall, I don’t think you will do better.

Check on the Matrix and BAD panels.  Visited their websites.  Look great.  Thanks.