Either the tonearm or counterweight was not manufactured correctly. If you have a caliper, measure the diameter of the tonearm' end. Relay that info to VPI.
Vpi 3d Tonearm - Counterweight fitment
Question for anybody that owns a turntable with one of the 3d arms.
How well does the counterweight fit?
I have an issue... But not sure if it is an issue. The diameter of the hole on the counterweight is almost 2mm larger that the outside diameter of the back of the Tonearm. This means that the fitment of the counterweight is very loose since there is literally a 1mm gap all the way around. This makes setting tracking force and azimuth almost impossible.
The thumbscrew they included is useless, since you really have to crank it down through the insert just to make contact with the Tonearm.
Vpi sent me another counterweight but it is identical, same issue. Their solution was to send me a set screw with an Allen wrench so I can get more leverage to crank the screw down....
At this price point I'm having a hard time accepting this as a solution. Wondering if this is how these things are supposed to fit?
How well does the counterweight fit?
I have an issue... But not sure if it is an issue. The diameter of the hole on the counterweight is almost 2mm larger that the outside diameter of the back of the Tonearm. This means that the fitment of the counterweight is very loose since there is literally a 1mm gap all the way around. This makes setting tracking force and azimuth almost impossible.
The thumbscrew they included is useless, since you really have to crank it down through the insert just to make contact with the Tonearm.
Vpi sent me another counterweight but it is identical, same issue. Their solution was to send me a set screw with an Allen wrench so I can get more leverage to crank the screw down....
At this price point I'm having a hard time accepting this as a solution. Wondering if this is how these things are supposed to fit?
- ...
- 19 posts total
- 19 posts total