I am hoping to receive the Lux within the next 7-10 days.
Phonostage recommendations under $3K
Folks,
I am looking to step up from my current Parasound ZPhono XRM (still under 60 days audition trial). To be honest, I am quite pleased with its performance, feature set and flexibility. I mean what else you can expect from a $600 phono. While I enjoyed listening to vinyl through XRM, I feel there is room for improvement and XRM may be the weakest link in my vinyl setup. And since XRM is the only phono I’ve experienced in my setup, I don’t have quite have a reference point. So what else should I be considering under $3K?
I prefer a relaxed and slightly warm sound since I mostly listen to jazz genre.
I started to put together a list list based on sound quality and flexibility with gain and impedance settings.
Parasound JC 3+ Phono Pre
Allnic H-1202
Leben RS30 EQ (requires a SUT for MC Cart)
I hear high praises on Herron VTPH-2A but it’s bit more than I would like to spend at this time.
My current vinyl setup, Thorens TD1601, ZPhono XRM, Hana ML (low output - 0.4mv), Accuphase E-650 and Tannoy Canterbury’s.
I would really appreciate some recommendations based on your personal experiences. Thank you!
I am looking to step up from my current Parasound ZPhono XRM (still under 60 days audition trial). To be honest, I am quite pleased with its performance, feature set and flexibility. I mean what else you can expect from a $600 phono. While I enjoyed listening to vinyl through XRM, I feel there is room for improvement and XRM may be the weakest link in my vinyl setup. And since XRM is the only phono I’ve experienced in my setup, I don’t have quite have a reference point. So what else should I be considering under $3K?
I prefer a relaxed and slightly warm sound since I mostly listen to jazz genre.
I started to put together a list list based on sound quality and flexibility with gain and impedance settings.
Parasound JC 3+ Phono Pre
Allnic H-1202
Leben RS30 EQ (requires a SUT for MC Cart)
I hear high praises on Herron VTPH-2A but it’s bit more than I would like to spend at this time.
My current vinyl setup, Thorens TD1601, ZPhono XRM, Hana ML (low output - 0.4mv), Accuphase E-650 and Tannoy Canterbury’s.
I would really appreciate some recommendations based on your personal experiences. Thank you!
- ...
- 110 posts total
RCM Sensor 2 would be a good addition to your list. https://parttimeaudiophile.com/2020/10/18/rcm-sensor-2-mkii-phono-preamplifier-review/ |
@lalitk The audition for the JC 3+ will be with a Linn LP12 (not sure of the specs) and a Rega Elicit-R. I am familiar with both so this should be a decent test to get an idea of the JC 3+. It might be a couple of weeks before I will be at the location to add this to my system so as to compare it with my Rega Aria... |
My set up is the Marantz tt-15 with an upgraded Soundsmith Zephyr MIMC ☆ ES Moving Iron, going to The Manley Chinook with 4 NOS Telefunken tubes. Using the Marantz 7705 preamp (50% vinyl - 50% movies) then the PS Audio M700 for my front stage, Tekton Electron SE speakers. It is a very sweet sounding set up, big improvement on the Manley Chinook after the Telefunken upgrade. |
- 110 posts total