Bought some 14/2 “speaker wire” from Home Depot


So I decided to amuse myself and on a recent trip to the Home Depot I bought some 14 gauge speaker wire. 25 ft for under $11.
I have what I think is a good system and my current speaker wires are analysis plus mesh oval 9 terminated in spades. My system is noted in my profile.
I substituted in the 14/2 I picked up- each leg is about 9.5 ft. Tinned bare wire at each end. I did use 4% silver solder.
Quite listenable, though perhaps not as extended at the high end. If someone told me I had to use the Home Depot wire I’d get along just fine. Leads me to one of 4 possible conclusions- 1- my hearing stinks; 2- my fancy Analysis Plus cables aren’t anything special; 3- my system isn’t resolving enough to make a difference; 4- given sufficient gauge, cable is cable. Of course, it’s also possible that my system is so good, any wire will allow that to shine through 
Your thoughts, comments, etc appreciated 

thanks
128x128zavato
Rx8man

you do realize that the most important part of every post I’ve ever made is the photo of Ms. Boyd. 
I once changed the photo to something else and responses to my posts after that essentially ignored my posts and wondered why I switched pictures. 
Realizing the errors of my ways Ms. Boyd returned. 
@williewonka 

the Uber cheap 14/2 was a for sh*ts and giggles. 
My Analysis Plus cables are much longer than I currently need so I’m just fooling around with wire now. Fwiw- I do think the oval 9’s are very good. 
The original oval 9’s (mine are a later revision) do have a reputation to discolor 
Just fooling around. Good to know. Because so far this was looking like you're one of these guys who really can't hear any difference. Although personally I doubt I'm strong enough to endure even a minute of listening to my system through lamp cord.  

Actually the best thing about this thread is you put "speaker wire" in scare quotes. What you have is not speaker wire. Its hook up wire. Lamp cord. Speaker wire, someone at least tried even a little bit to make it sound less crappy than lamp cord. Can't say good. Just less crappy.  

When I say takes me back to the 80's, I mean literally. It was like 1989 when I started seeing things about speaker wire being about more than gauge. Because up until then the audio world was dominated by the evil idiot Julian Hirsch. A name I suspect many here do not even know, yet his technical writing in the now thankfully defunct Stereo Review influenced countless audiophiles, convincing them wire is wire and all you need is enough of it (gauge) and nothing more can ever be better. 

The vast majority of people, nevermind audiophiles just people, are monkey see monkey do. So this totally false notion goes on and on living a life of its own. To this very day there's many still duped into it, and you see them here every single day. So when some guy comes along saying he bought lamp cord and its just as good as his whatever, no its not, and its not your system.  

Anyway like I said its 1989 and some guy is saying two runs of lamp cord (shotgun) is better than one. Now this sounds silly but if you have enough lamp cord laying around its cheap and easy to try it and find out for yourself. Which I did. And heard the difference. And the rest is history. 

So that is my suggestion. Take your crappy roll of lamp cord, reel off another length of it and hook it up. It won't be much better. Hardly at all in fact. But it will be better. Which is perfect. Because what we really need to do right now more than anything else is restore your status as a guy who can actually hear stuff. Which so far is still very much in doubt. So please do try it and let us know.
This is classic case of skin effect
The only skin effect here is the one going on with his avatar.