1st Post Intro & Ramblings

Timing will be "aligned" as long as the two speakers are equal distance to the ears. There really is no other alignment. Most of it is a balancing act between direct/reflected, and shadowing function of the head to the other ear.  The first heavily impacted by speaker and room, the second by speaker, and angle.


Mixing studios are such a mish-mash of near-field, close to near field, and other setups, that trying to match it with your home setup would be pointless, and most wouldn't know what Cardas configuration was in that world. Pointless, but admirable goal. Most mixing rooms are deader though than the average home setup.  The point here is the setup is artificial, so using rules such as equilateral triangle, golden rule, Cardas, etc. really makes little sense since you are not recreating the recording session nor even the mixing session. 

As eloquent as all that sounds, you offered up nothing to help any person reading this. On the other hand, you take a measuring tape and use those simple triangle steps, stay 2-4ft away from walls and toe in a little at time. Something I recommend frequently to people, go to the local high end shop and spend some time listening to a properly tuned system. Chances are we cannot afford it but now you have a reference, you now know what stereo actually sounds like. The next thing is to get it at home at a price point that you’re comfortable with. Even with semi decent speakers (Polk, Boston, Q etc) and a quality amp, you will get results using those basic steps.

Timing will be "aligned" as long as the two speakers are equal distance to the ears. There really is no other alignment. Most of it is a balancing act between direct/reflected, and shadowing function of the head to the other ear. The first heavily impacted by speaker and room, the second by speaker, and angle.

This is correct. More people should know this. Save a huge amount of time. Unbelievable amount of time. One particularly clueless individual thinks there is just no way speakers can be set up in 10 minutes.  

Reality check. Those who follow my posts will know this. I'm at CES, yes the Consumer Electronics Show. Vendor pass, Talon Audio room. They are just not getting the sound they want. Full hour at least tweaking this way, tweaking that. Sounds good but the image just isn't "locked in". Was my first time there so trying to fly on the wall it until it gets to where they are out of ideas and ready for anything from anyone.

Do you have a tape measure? Yes. Do you have a string or something we can use for a straight line? Yes. So we stretch the string, put the speakers on that line, measure to the middle of the string, run another one at 90 degrees, double-check speakers are equidistant from that point. Done. Not even 10 minutes. Beautiful imaging. Everyone happy.

Done it many times, many different systems, many different rooms. It just ain't that hard folks.  

Wow. I think someone should let the speaker manufacturers know the information in there instruction manual is false 

What? All of them? Can you name even one with instructions that conflict with this? No. You can't. You just thought it would be smart to act like you know something, when you don't.  

Listen, I know a lot of people still haven't figured this out. Its not news to me. Nor is it new that people continue to believe BS simply because a lot of other people believe the same BS. Its why we have the word sheeple. 

Figure it out. Until you do, enjoy your status, #28.