Thiel Owners

They are more like 2ohm, and at 60hz where the -phase angle meets the 4 ohm could represent even less EPDR load to the amp.
https://www.stereophile.com/images/archivesart/1208T37fig1.jpg

What the member who’s thinking of bridging should do if he must get another ABH2, instead of bridging it, which will be a step backwards with these CS3.7’s in all parameters except total wattage.

He should vertical bi-amp the two ABH2 amps, that way the whole power supply energy is available to just one bass speaker of one channel instead of two. The amp/s remains stable and able to drive these nasty loads.
https://www.av2day.com/wp-content/uploads/2014/05/biamp2.jpg

Cheers George

This same AHB2 conversation was had in another A'gon thread in 2018 where John Siau participated. I don't think the folks responding to him realized he was the amp designer.

The vertical bi-amp will not work with the Thiel CS3.7 since it only has 1 set of speaker inputs.

As it stands:

1) The designer of the amp told me by email that the amp will be good with the speakers. He looked at the speaker specs.
2) The founder of the speaker company mentions that he has been testing 2 AHB2 for the last 2 years.
3) @unsound makes a great point about finding something else that does not shut down. I think there will another amp in the future to have in the stable.

At this point a second AHB2 is an easy buy for me. I love the sound of this amp. They are said to work with the 3.7's, issue is how well. One thing I have learned the last 2 weeks is that the CS3.7 is not a speaker to be played crazy loud. That is fine for my current application in my office. A little more grunt from the 2 amps will take me to an ideal spot.

^With the right amp you can play these speakers pretty loud. Jim recommended up to 600 Watts per channel and used a Krell FPB 600 for them.

When I spoke to Rob Gillum about the robustness of the COAX he said that it was something that should last a very long time. However, he observed that most of the damaged COAX drivers occurred because people thought a $13K speaker can play as loud as an amp was capable.

I blew out my old Revel Salon 1 tweeters a couple of times with my Bryston 600 watt mono blocks. I have learned my lesson of playing too loud.

What this means to me is that the 3.7's are my permanent take to the grave office speakers (not blasting it in the office). I will get something else for my living room.

^Most driver damage occurs when people try to play too loud with underpowered amps.