2. digital
  3. 161488-147734

Looking for a vinylesk sounding DAC

I cannot say I wasn’t satisfied with my system.

Laptop (Quobuz Studio) - > Schiit Bifrost 2 - > Ocellia Reference RCA - > Werner Acoustics, Selene (active tube preamp using two VT-231 from RCA) - > passive preamp - > Ocellia Reference RCA - > First Watt F6 dual mono custom built - > HEDD Audio’s "Heddphone" / Hifiman HE 4

From the beginning I started to built it I had a quite concrete idea of what it should sound like in the end: vinylesk without using vinyl. It took me a while to get there and now I really thought I got it: Due to the F6 the outcome is brutally powerful and incredibly fast while the tube stage adds lots of body, depth and a rich organic undertone. Finally the RCA’s from Ocellia were adding the fine raffinement and a nice holographic soundstage. Nothing smears, in just every situation everything stays transparent, well controlled/articulated and the separation is just excellent.

BUT when listening to streamed vinyl I still feel the need for action - I just want EVERY track from quobuz to sound like this. Please take just some seconds and listen to this:

https://musicandvinyl.blogspot.com/2020/08/haruomi-hosono-from-aegean-sea.html?m=1

There is just MORE elasticity, MORE tonal density, MORE plankton, MORE concentration to the point, MORE light-footedness and MORE palpability (compared to a "disdainful" quobuz stream). Do you know what I mean?

I still think and hope a new dac could be the nirvana-solution. But which one would manage the job to sound just like vinyl (99% would be ok...)?

Happy to hear your suggestions!
barrista0611
barrista0611 OP
26 posts
 
@jjss49 That’s - even for 3 systems - an impressive list (with some candidates I’m interested in), thanks a lot for your effort! Out of those you have kept: which one do you think could match best in my case, if you take as a basis that I prefer really rich, organic and thick textures in the mids and an overall fine articulation with a tactile and palpable grip of the bass while I don’t care for the absolute last resolution in the treble region? It's not that I don't like an extensive resolution in the treble too as I see how much this is related to a holographic soundstage but I'm a bit sensitive in that region. 

Sure this is system dependent but I guess every dac got it’s own fundamental character that it brings with.
nekoaudio's avatar
nekoaudio
489 posts
 
@barrista0611 well, a caveat with the D100 Mk2 and some other DACs with transformer-based analog output stages is that they will have a higher output impedance. So matching one with a passive preamp may be less than ideal if the preamp input impedance is too low or if there is a lot of fluctuation in the input impedance by frequency. Some passive preamps have changing input impedance by volume, while others do not.

But primarily a transformer-based output adds some warmth (i.e. distortion), usually to a slightly greater degree in the lower frequencies versus the mid-range or treble, without the negatives commonly associated with a NOS design like rolled-off treble or aliasing artifacts or the higher distortion associated with a tube design.

There’s decent set of measurements posted for the D100 Mk2 on the Neko Audio website, and many reviews can be found online.

Lumin and Linn also use output transformers in the analog output stage of their higher-end models.
ghulamr's avatar
ghulamr
104 posts
 
some good recommendations already. May I add - Metrum Acoustics NOS R2R DAC's. I have both the Onyx and the Adagio. Fantastic sound - cannot ask for more. Driving my Harbeth using hybrid Croft amps. Sweet combination. 
jjss49's avatar
Ag insider logo xs@2x
jjss49
6,612 posts
 
@barrista0611

That’s - even for 3 systems - an impressive list (with some candidates I’m interested in), thanks a lot for your effort! Out of those you have kept: which one do you think could match best in my case, if you take as a basis that I prefer really rich, organic and thick textures in the mids and an overall fine articulation with a tactile and palpable grip of the bass while I don’t care for the absolute last resolution in the treble region? It’s not that I don’t like an extensive resolution in the treble too as I see how much this is related to a holographic soundstage but I’m a bit sensitive in that region.


You are a 100% headphone listener? I am looking at your opening post. If so, my experiences are only partially applicable as I very rarely listen to HPs. So I value imaging (depth, height, width, specificity) greatly with my speakers, in conjunction with tonal balance and timbre on voices and real instruments. For HPs the considerations and weighting of SQ aspects may be rather different. Feel free to PM me. Several of the DACs I really like are actually for headphone listening (Ayre, Mojo, Amethyst) , but I use them for my regular stereo system. I also don’t want to get too specific about the negatives of the various units... people here get defensive and pissy when someone says what they may have and like didn’t work well for reasons a b and c...
barrista0611 OP
26 posts
 
@nekoaudio Thanks for the explanations. I just found those reviews on your website and will get through them!

@ghulamr The Metrum Onyx already is on my list. Hopefully I'll have a chance to try it out soon. Thank you! 
More to discover