2. amps-preamps
  3. 161618-147869

Which tubes are the best?

Hi folks, I just got a Muzishare X7 integrated amp. It is beautifully made and sounds like it has a lot of promise. Even though I'm just breaking it in, I am thinking about tube changes. Why? It's just what I do. 
I'd like your opinion on the best replacement tubes, meaning smoothest, most "tubby" and mellow tubes. 
I won't be chasing NOS tubes. I'd like your experience with Gelenlex Gold Lion, TungSol, Mullard, Telefunken, or?,  etc. of current manufacture. The amp uses KT88, 12ax7, 12au7 and CR34 rectifier. 
Any thoughts about KT88 vs 6550 would be appreciated. I used to prefer 6550 way back when. 
Any information would be appreciated. Yes, I could go through all the old posts but I do have vision issues after four operations and that's why I'm asking straight out. 
Thanks in Advance. 
Back in the day, I used to do some serious tube rolling. The absolute mellowest, most laid back and detail rich tubes I ever found were some Mullards advertised in the back of Audio magazine. They had Magnus Organ printed on them. They were amazing. Unequalled. Ten years ago, I was cleaning out stuff and took a box of my small tubes to a local dealer. Some guy gave me $350 for them. Wish I still had them heh. 

fredcdobbs
lou_setriodes's avatar
lou_setriodes
681 posts
 
The Psvane KT88 supposed to be very good, but I’ve heard the Gold Lion are the best KT88’s.  The best 12ax7 is a 5751, that’s why cj always specs them in their preamps.
fredcdobbs OP
128 posts
 
Thanks Lou. I have worked hard to put together a nice solid state system but now That Old Tube Majic has me in it's spell. 
Years ago I tried all kinds of tube stuff. Musical Reference, Cary etc. Nice to be back. I never got the point of having tube gear that sounds like SS. 
jjss49's avatar
Ag insider logo xs@2x
jjss49
6,612 posts
 
as i understand it this muzishare unit is basically a primaluna knockoff with a tube rectifier and downgraded output transformers

so i will share my thoughts on tubey tubes

old stock ge 12au7/ax7

tungsol (new russian) 7581’s if like the primaluna’s this unit can autobias and run 6l6gc/kt66 equivalents - in general i find current russian power tubes less sharp and treble intensive than the chinese counterparts
roberjerman
4,319 posts
 
You can't go wrong with any of the Slovakian-made JJ's! I'd replace the Chinese tubes presently in your amp with all JJ's! 
millercarbon's avatar
millercarbon
12,531 posts
 
I've run tube integrateds using 6550 or KT88 for well over 25 years. Yes there are differences between tubes but nowhere near enough to me to be worth changing (rolling) just for the sake of change. Tried it, no thanks, bigger fish to fry.

That said, KT88 are a bit warmer, with a bit more tubey liquid magic than 6550. Enough so the warmest 6550 is still not as nice as the most flat least warm KT88. There's just not enough there for me to be chasing after expensive NOS, so you are welcome to go fishing and good luck landing the big one. But of all the tubes over the years my favorite by far is JJ. Better more 3D liquid than most if not all, and yet still with great extension and control, but what clinches JJ for me is their reliability and longevity. So +1 roberjerman, JJ all the way!
More to discover