I too am an Altec fan! Had the Madrid's and Valencia's. Now have Bolero's, Santana 1's, Segovia's and Stonehenge 1's. The last are particularly adept at rockin' out! Now where did I put that Led Zeppelin II ?
New speakers ! Altec A5 !
https://systems.audiogon.com/systems/9054
I wanted to share my new speakers. We had a pair of Altec A7s but wanted nicer cabinets. We hired a local cabinet shop/speaker fanatic to rebuild a set. He doubled the original thickness and veneered them in Osage Orange. The Drivers are Great Plains 416c for the woofs, Altec 288 with new GPA aluminum diaphragms for the mids, and Faital Pro HF10AK for the tweeters. The Large 1505 clones are walnut and come from Vietnam, and the small multicell horns are from Markus Klug in Germany. Crossovers are Jean Hiraga inspired 3 way designs by Pete Riggle with the crossover points at 500hz, and 10Khz. Bass is augmented with an SVS PB16 ultra, and a GSG Devastator with a Lavoce 21" driver. We power the GSG sub with a Behringer 3000dsp amp. I'm currently using a Sun Audio 2A3 clone. Front end is a Thorens TD318 with an Ortofon 510 MK2, as well as Tidal through PC via the DAC in the Mcintosh C47 preamp. It sound great, and the crossover allows the tweeter to be turned off, to revert to the 2 way design. It also has a notch filter around 1Khz with 0,2,and 4 db negative attenuation to tame the mids. The Tweeter Lpad is slaved to the midrange Lpad so that it remains in sync if you adjust the mids. I still need to add some damping material inside the cabinets but I'm quite pleased so far. Just wanted to share, in case there are some Altec guys here. Thanks for looking. Adrian
I wanted to share my new speakers. We had a pair of Altec A7s but wanted nicer cabinets. We hired a local cabinet shop/speaker fanatic to rebuild a set. He doubled the original thickness and veneered them in Osage Orange. The Drivers are Great Plains 416c for the woofs, Altec 288 with new GPA aluminum diaphragms for the mids, and Faital Pro HF10AK for the tweeters. The Large 1505 clones are walnut and come from Vietnam, and the small multicell horns are from Markus Klug in Germany. Crossovers are Jean Hiraga inspired 3 way designs by Pete Riggle with the crossover points at 500hz, and 10Khz. Bass is augmented with an SVS PB16 ultra, and a GSG Devastator with a Lavoce 21" driver. We power the GSG sub with a Behringer 3000dsp amp. I'm currently using a Sun Audio 2A3 clone. Front end is a Thorens TD318 with an Ortofon 510 MK2, as well as Tidal through PC via the DAC in the Mcintosh C47 preamp. It sound great, and the crossover allows the tweeter to be turned off, to revert to the 2 way design. It also has a notch filter around 1Khz with 0,2,and 4 db negative attenuation to tame the mids. The Tweeter Lpad is slaved to the midrange Lpad so that it remains in sync if you adjust the mids. I still need to add some damping material inside the cabinets but I'm quite pleased so far. Just wanted to share, in case there are some Altec guys here. Thanks for looking. Adrian
- ...
- 6 posts total
| Post removed |
- 6 posts total