subs for Sonus Faber Cremona M floor standing

Raul, why do you think that speaker manufacturers do not use 12"tweeters or even for that matter many 12" midrange drivers. OTOH, why do you think that subwoofer manufacturers do not use 1" woofers? The ability of the driver to push air may have something to do with it, NO? IMHO, the large 12" -18" drivers just do NOT sound that fast in compared to say a tweeter of 1".....an 8" driver cannot move as much air as a 18" driver, BUT to my ears it's a lot faster sounding in the mid bass- upper mid bass area. ( which is where most of the bass instruments are producing sound)
So is it really a myth, or do you let your ears do the walking and talking, or your .:0)

Dear Daveyf: IMHO it is not only the driver dimension/size but which kind and size of magnet, woofer build material, build shape and overall construction and build excecution. In the other side and between other things the amp damping factor count too.

Now, IMHO there are no perfect drivers and one way or the other exist trade-offs and our choice will depend on our targets because if we want " flat " bass frequency down to 18-20hz then a 8" driver can't do it.

Normally when we are asking for a sub we are asking for that low kind of bass.

IMHO low bass is the frequency range more difficult to achieve/reproduce on accurate way and that's why I posted the importance to analyze/research in deep before any choice.

The subs subject and understanding on two channel system is so " new " that even some subs manufacturers has no clear and precise answer about, almost all take the add-on subs mainly as the traditional way: as a bass re-inforcement system but for me and my frist hand experiences with different audio systems is that that " traditional " way of think regarding subs is wrong or at least incomplete way incomplete.
That's why RELs has no high-pass function.

I'm not sure how good are the SF people about but maybe if you ask them how to mate their Cremonas with subs maybe ( maybe not. )they could tell you that the Cremonas in full range fashion and subs as " only " reinforcement bass.

Anyway, the subject is open to questions/answers and obviously IMHO there is no one answer for every single system/room circumstances.

Regards and enjoy the music,
R.

Well just an update, looks like I am picking up a JL F113 this weekend. I realize that I have to start somewhere. I was real close to the Velodyne as per Raul's advice and some research I did. I unfortunately got the JL bug and need to put it to rest. I will post my thoughts as they come. Thanks again for everyone's two cents. Now I see why I was confused on the matter.

12-14-11: Erictye
Well just an update, looks like I am picking up a JL F113 this weekend.

Oooh. I think you're going to be really happy with that. Congratulations.

Well I just set up the sub for about 20 minutes now. I had a DBX drive rack PA kicking around. I had to run some cheaper lines as my Purist are rca only. All I can say at this point is I am definitely getting another sub. This is exactly what I was missing. I need to do a bit of fine tuning yet. I have a question. On my C2300 I have to outputs to go to amps. Can I run the sub amp directly to the second set of outputs thus eliminating the DBX drive rack. What are the pros, cons doing it either way.