Half the information on CDs is analogue


I would like to argue that one of the reasons that some transports sound significantly better than others is because much of the information on a given CD is actually analogue (analog) information.
An excellent transport does not just read digital information: 1s and 0s (offs and ons); it must be sensitive enough to pick up the other information that has been stored as a physical property of the CD medium. This 'physical' information, like the tiny bumps in the groove of a vinyl record, is analogue information.

Before I say more I'd like to hear what others think.
exlibris
Exlibris,

I have found differences in DAC's but these are usually very subtle, most often a slight difference in the treble and often not enough to make me worry that much. The only relatively much larger differences I have come across are all associated with analog gear (particularly mechanical systems that vibrate; such as speakers, listening room and turntable cartridges, and to a lesser extent tube amps, which add a bit of their own nice flavor to the sound).

My comments are relative - no doubt there are differences between CD players and improvements can be had for big $$$ but I would have difficulting in calling these differences "huge".....is there a particular CD player that you have in mind that sounds hugely different from others?

As far as digital sounding so bad...perhaps this is a matter of taste. IMHO, I find digital sounds more accurate and detailed....some might call this harsh and brutal but my perception is that it is more realistic....too each his own. When I used analog I used to buy Japanese pressings because they sounded better but now that I use CD it makes no difference where the CD was pressed (althouogh the quality of recording/mixing and mastering remains very important)
Here's a simple task that most everyone with a stand alone CD burner or computer based burner can do. That is, if they have the desire and means to do so.

Take an analogue source, record it onto a CD and then compare the original analogue source to the digital "cloned" recording using the same playback equipment. If you can't hear the difference between the original and the "digital clone", you better check into the office of an audiologist for a very thorough exam. You are either going deaf and / or are thoroughly lacking in listening skills.

Until one has done something like this, making comments about this subject is useless and a waste of everyone's time. Anybody that has done something like this will know why older analogue recordings pretty much HAVE TO BE remastered when released on CD. That is, they have to apply TONS of equilization in order to get something that even remotely resembles the "natural" tonal balance that was lost when converting to digital. Sean
>

PS... making digital to digital copies typically results in excellent copies. When going from analogue to digital, even using the shortest and purest path possible, it all goes to hell.
Sean...Did it ever occur to you that the "TONS of equalization" that you say is applied to digital recordings may actually be the removal of equalization that was applied to make vinyl sound good? There are several digital recording labels that claim to use no electronic equalization or other processing at all.
I'm comparing apples to apples here. In the tests that i performed, i used live analogue recordings that i had made. These recordings had no form of compression, equalization, etc.. performed on them. I then converted them over to CD via an audio based digital recorder that i have. The end results were that the digital "clones" weren't clones of the original analogue signal at all, but bad recordings that barely resembled the originals in terms of tonal balance.

Using this same digital recorder, i've made very good "dubs" of other digital recordings. As such, the losses incurred going from analogue to digital are FAR more severe than when working strictly within the digital domain. This is probably why so many of the early "AAD" discs sounded SOOO bad. That is, they were recorded and mastered in analogue form, but sold as recordings in digital form.

Given that i've had similar results using other digital based recording devices that i have access to, i know these results to be both consistent and repeatable. This is why i said what i did above i.e. others can find out for themselves by performing just such a test. Sean
>
Sean, please name your digital recorder. The implications of your comments is that A/D conversions cannot capture any analog signal, whether a line feed from a microphone or the output of a tape deck. Even professionals who prefer analog recordings have admitted that high resolution digital is more faithful to the original sound.