My number one takeaway is... only you know what you like, so filter out the hype. Most importantly, whenever possible, listen to whatever component you're considering at home connected to your system. I auditioned 5 integrated amps at home before deciding. It was worth it.
Audio Lessons Learned - post your best advice for the newer members!
Hi,
I thought it would be great to have our longtime audiophiles post their "lessons learned" along the way.
This is not a thread to start arguments, so please do not do that.
Just a repository where newer members can go to get a few good tidbits of knowledge.
I'll start - I have been an audiophile for 50 years now.
1. Learn about how humans hear sound, and what frequencies SHOULD NOT be flat in their response.. This should be the basis for your system. "Neutral" sounding systems DO NOT sound good to the human ear. You will be unsatified for years (like I was) until you realize this.
2. I do not "chase" DACS anymore.. (I went up to 30K Dacs before realizing the newest Dac chips are now within a few % of the high end Dacs.) Do your research and get yourself a good Dac using the best new dac chips. (about 1000.00 will get you a good one) and save yourself a fortune. - This was one of the best lessons I learned (and just recently) . It allowed me to put more of the budget into room treatment, clean power, and cables which are much more important.
3. Do you want a pleasant or unpleasant sounding system?
I had many very high end systems with NO real satisfaction, until I realized
why a certain company aimed for a particular sound..
4. McIntosh:
As a high end audiophile, I regarded McIntosh as just a little above Bose for about 40 years.-- (not good)
I thought I was an elite audiophile who knew way too much about our hobby to buy equipment that was well made, but never state of the art and colored in its own way.
This was TOTALLY WRONG, as I realize now.
McIntosh goes for a beautiful sound for HUMAN ears, not for specification charts. This is not a flat response, and uses autoformers to get this gorgeous sound. If you know enough about all the other things in our hobby, such as room treatments, very clean power, and very good cables, you can bring a gorgeous sounding McIntosh system to unheard of levels. I have done this now, and I have never enjoyed my music more!
Joe55ag
I thought it would be great to have our longtime audiophiles post their "lessons learned" along the way.
This is not a thread to start arguments, so please do not do that.
Just a repository where newer members can go to get a few good tidbits of knowledge.
I'll start - I have been an audiophile for 50 years now.
1. Learn about how humans hear sound, and what frequencies SHOULD NOT be flat in their response.. This should be the basis for your system. "Neutral" sounding systems DO NOT sound good to the human ear. You will be unsatified for years (like I was) until you realize this.
2. I do not "chase" DACS anymore.. (I went up to 30K Dacs before realizing the newest Dac chips are now within a few % of the high end Dacs.) Do your research and get yourself a good Dac using the best new dac chips. (about 1000.00 will get you a good one) and save yourself a fortune. - This was one of the best lessons I learned (and just recently) . It allowed me to put more of the budget into room treatment, clean power, and cables which are much more important.
3. Do you want a pleasant or unpleasant sounding system?
I had many very high end systems with NO real satisfaction, until I realized
why a certain company aimed for a particular sound..
4. McIntosh:
As a high end audiophile, I regarded McIntosh as just a little above Bose for about 40 years.-- (not good)
I thought I was an elite audiophile who knew way too much about our hobby to buy equipment that was well made, but never state of the art and colored in its own way.
This was TOTALLY WRONG, as I realize now.
McIntosh goes for a beautiful sound for HUMAN ears, not for specification charts. This is not a flat response, and uses autoformers to get this gorgeous sound. If you know enough about all the other things in our hobby, such as room treatments, very clean power, and very good cables, you can bring a gorgeous sounding McIntosh system to unheard of levels. I have done this now, and I have never enjoyed my music more!
Joe55ag
- ...
- 112 posts total
1- Don’t sweat debates over definitions of “audiophile “ or “music lover”. Just listen to the music. 2- Know what sounds good to you, because everyone hears differently. And expect it to change over the years because your hearing will change. 3- Stick to your budget. There are ALWAYS more expensive items to buy. But you have other things to spend money on also. 4- Wife/Spouse/ Partner Acceptability Factor (WAF/SAF/PAF) is more important than you think. Any limiting criteria may actually encourage you to research stuff you wouldn’t normally consider. My wife working from home has opened up the wide world of headphones. 5- Find a few reviewers that match your tastes. I like Steve Guttenberg (similar music tastes) and John Darko (reviews streamers and headphones really well), but your preferences may vary. |
For me, cables have provided the greatest challenges, but over a 6 year period here are the things I have learned that have made significant improvements in my DIY cables and as a consequence - improved sound quality to levels I could not have believed when I started all this DIY stuff WIRE QUALITY - improves dynamics clarity and imaging
INSULATION - acts like the dielectric in a capacitor and as such will cause distortion. Each insulation type has a different Dialectric Constant (Dk). The higher the value the more noise is created in the cable
CABLE GEOMETRY - is the most significant method of reducing noise generated within cables.
CONNECTORS - I use silver plated copper connectors on every cable
How can you ensure all of these are in place on your cables? Build your own - see this link "The HELIX IMAGE" - With a little help from my friends | My Audio Alchemy (image99.net)
- UNLESS your amp is one of the newer and very expensive reference style Symmetrical Balanced Designs - These amps are a bit like a Balanced power supply - one speaker output binding post carries the signal - the other Binding post is the same signal but 180 degrees out of phase For this type of amp both wires must be identical to achieve the best sound For commercially available products = I consider Nordst and Inakustik to be among the very best available - no snake oil - just great science AND - trust YOUR ears - not someone else’s :-) Regards - Steve |
I have been an audiophile since the mid 80's. Trust your ears. I took a piece home for audition once and I just didn't like the sound (cd transport and DAC). When I returned the components and told the salesman I didn't like them he told me I didn't understand what high end sound was supposed to sound like. I told him maybe so but I don't like that sound. I never went back. Use reviews to make a short list. Over time you will find reviewers who share your sonic preferences. Try not to obsess about Class A, B, C, etc. If the system doesn't sound good to you it doesn't sound good no matter what anyone else tells you. |
- 112 posts total