Why do you need so much power?

By the way 80 watts sounds only about 3X louder than 8 watts.

Should be only 2x louder. Perceived loudness is equal to
k^(1/3.5), where k is ratio of power. For 10x power it is equal to 1.93
10x power is equivalent to 10dB sound level increase equal to 2x loudness increase (3x will be sound pressure change).

@ssmaudio,  the Pass J2 is a great amp, do yourself a favor and pair it with your speakers.   I have never heard or owned an Emotiva amp.

Respectfully, 
Jose

@smrex13
The Tannoys are really quite efficient; the 89, 91, 93, and 96dB models I’ve heard of theirs all seem true to their rating when compared to other brands. You’ll especially notice this if you have a tube preamp without a dead-quiet noise floor. I know that some other brands have more "liberal" with their ratings, or do the 4 ohms / 2 Watts "trick" to add 3dB to the visible spec. Or sacrifice LF extension to goose the efficiency.

@kijanki
The old "only sounds 2x louder" thing is very subjective, and there are 2 versions of it: +6dB (8 Watts to 32 Watts) and +10dB (8 Watts to 80). All these rules of thumb, including 1dB being the smallest "perceptible" unit, are targeted for non-audiophiles, non-critical listeners. When I get in the sweet spot of my system and start listening, even 1dB is quite significant and readily noticed (or missed). 3dB is a lot, 6dB is a LOT, and 10dB is a HELL OF A LOT. So yes, personally I do appreciate these differences quite a bit.

It is always good to have a much more powerful amplifier than your speakers can handle for being able to handle highly dynamic music passages.  This will usually not happen with vinyl but will very likely happen with digital sources and home theater.

It is better to have it and not need it, than need it and not have it.