Just how many outlets do you need for your stereo?

@mitch2 @audioguy85  Thanks for the info, it was very helpful. 

The two units from Amazon arrive today - these are the two I mentioned before .  For $250, I am not expecting much in the filtering but the sequencing will be much appreciated.  I will report back on the innards and performance.  Hopefully it will serve as a stop gap for now until I find something suitable for long term use.

Keeping it at one dedicated receptacle avoids a ground loop issue. I suppose if you need more than 20 amps (I doubt it) you could always go with 10/2 cabling and a 30 amp breaker and 30 amp rated receptacle. To me it sounds like over kill.

The two Pyle PS1000 units arrived today.   The PS stands for Power Sequencer and it will sequence 8 outlets  Overall, it is a clean build and well worth the $125 price for each.   The sequencer can be daisy chained so up to 100 outlets can be sequenced, although each unit requires a connection to the AC mains.   See it  here - https://smile.amazon.com/Outlet-Power-Sequencer-Conditioner-Controller/dp/B07P76C2PF/ref=sr_1_6?crid...

The sequencer, voltmeter, temperature gauge, and relays are all controlled by a microprocessor.  Looking at the manual, I see a 24 dBm / octave filter on each outlet.  The filter is made up of two X caps and two common chokes so there are two 12 dBm / octave filters back to back on each outlet, making up the 24 dBm filter.  No values are specified, so I can't sim it in Cadence.

That is the good news.  They somewhat bad news is they also have the typical Y capacitors from line and neutral to ground,  Although the Y caps can improve noise filtering somewhat, it also bleeds some line current onto the grounds, so it may induce a low level hum into the system.   In general, I dislike inducing any current onto Earth ground, but it is a very common practice.  [UL codes are pretty disgusting in this respect, as they allow multiple milliamps of bleed current.]   The primary difference between regular line filters, like this one, and hospital grade line filters, are the lack of Y caps in medical grade filters.
I'll do some more involved listening tests this weekend and next weekend, if I get some time in the lab, I will see how much of that microprocessor clock bleeds onto the outlets and what the filter bandwidths are like.   Hopefully, it is better than the APC unit I have now.

Only 6 MC?
Where do you plug all your Schumann resonators?

Despite other comments, I still plug a pair of big monoblocks into separate dedicated 20A rings.  Doesn't happen with my Krell KRSs but on the ordinary 13A house ring my KSA50 (Krell's first product) dims the lights for a second when I power it up, while it fills its big toroidal.

"A 15 amp standard house outlet will supply about 1800 watts. To be conservative, say 1500 watts."  Cakyol

Should say a 15A circuit will supply 1800W.  As most circuits have a few outlets, other devices plugged in must be added into the burden on that circuit.  Should unplug those if you want to 'dedicate' the circuit to your AV system, or install a one-outlet circuit, at which point that one should be a 20A.  Why skimp--nothing should be ordinary in a high-performance system.