2. speakers
  3. 165475-145000

Powered Subwoofer connected to integrated amp's speaker outs?

I'm interested in purchasing a REL T/7i which is a powered subwoofer. I have an older Marantz PM7000 integrated amplifier which has no explicit subwoofer outs. REL has a tutorial about hooking up their powered subwoofers to the amp from the speaker outs on the amp to the high-level input on the sub. This is all very straightforward and simple. What is not clear, however, is if there will be any power demands on the amp. My guess is no, since the T/7i has its own amplifier. I would like all the power from the PM7000 to be available to the KEF LS50 Metas that I'll have hooked to the other speaker outs. Can someone please address my concerns? Thank you.
jwhite
turnbowm
353 posts
 
The Rel T/7i has a relatively high input impedance so it poses no problem whatsoever. I have an integrated driving Kef LS50s and a Rel T/5i connected to the integrated outputs using the high-level Speakon connector.
yogiboy's avatar
yogiboy
5,701 posts
 
Here ya go!!
For those not familiar with REL, they prefer using a high-level connection from your amplifier’s output, accomplishing two things: your main speakers are run full range, making for a more seamless crossover and the sub picks up the exact tonal character of your power amplifier.
wolf_garcia
6,706 posts
 
I think the REL's "high level" inputs have something like a 100,000 ohm load on the amp providing the signal which seems like none at all...I use 2 RELs (summing the impedance means maybe a 50,000ohm load) running from a relatively low powered (12 to 17 wpc depending on tubes used) little tube amp adding zero strain to the amp, and having no effect on the main (very efficient) speakers. Works swimmingly.
More to discover