Speaker Cables

The point I am trying to make is that Ken’s data confirms that you can’t just. throw in a modern film cap in place of an old style electrolytic and expect your frequency response to remain totally in tact. You may get lucky, but I wouldn’t bet on it.

Measured deviations of up to 5db at 20kHz between samples show considerable scope for audible changes.

If you are swapping a modern film with a modern film, your chances of success are far greater.

Hey pesky_wabbit stop chasing carrots and educate yourself.

To get an understanding about XO design try reading articles from the experts I mentioned. You are not arguing with me, you are arguing with Sigfied Linkwitz. Yes it's that Linkwitz of Linkwitz/Riley fame. His filters are probably more widely used than Bessel, Butterworth or Chebychev in crossovers.

You state:  (ESR) "altering a fundamental characteristic of the crossover which affects frequency response"

For simplicity lets look at a first-order XO.  A series resistance will NOT alter this basic function, the position of the XO knee or -3dB point is determined by the VALUE of capacitance, (not the value of capacitance plus ESR)  The XO response has now been established and any resistance in series will merely attenuate the level to match the other drivers.

Now what about speakers with level controls for the tweeter?  Are you claiming that when you adjust the level setting, which just switches different value resistors in circuit and here we are talking 10 or 20 ohms and not milliohms, that it is changing the XO point?

I consider neither your nor K Kantor's unsubstantiated bloviating worth hijacking this thread further.

This issue has already been examined in detail by those far more informed than you: do the legwork yourself. If you wish to ignore hard data because it challenges your beliefs so be it. Your exposition of logic beggars belief. I have no more to say on this matter.

Why not use Proac's own speaker cables? My dealer uses them with all of his Proac's even though he sells AQ, Cardas and a few other brands. It's not that expensive and sounds great with all Proac speakers.

Let’s see if this works. AGOn deleted my DM to you. Apparently they prohibit sending contact info. Ask for John.

https://www.audioconnect.com/