Silver cables added resolution


Hi All,
I’ve been able to test some silver cables, and they seem to perform differently (in a good way) from the Copper ones. With the current cables I have one point where it seems to be very clear is the added resolution, specifically at the top end.

On my system, and because of the added resolution, it seems I now hear more of the mains noise.,I was wondering if anyone had similar experiences and what they did to reduce the mains noise perception?

Thanks in advance
Fil


filipedine
some of the worlds most expensive cables all use Silver to high purity form. Silver has had bad reputation only because of the internet rumours based upon someone opinion with inferior grade stuff.

Real Silver, not Mixed stuff sounds anything but bright. I find resolution increased, The Emotional connection just gets closer. 

The Albedo Silver i have are smooth as silk and even better then all the copper i ever had tried in my room.

OFC copper has a Conductivity of 100 (from AES=Audio Engineering Society) and is the Standard in Audio.
Technical silver has conductivity 106 (Gold btw. 90)
That means, Silver can carry 6% more information than anything else. This is fact.
But, it can be decreased by the kind of solder, the kind of plugs which are used (cable or Phono input), from the Phono input to the cable ...
Bob Graham - for example - did his homework and delivers his Arm with Silver cable inside, his own IC-70 is silver cable...
You can ask 50 audiophiles and you will get 50 recommendations, that is fine, but what you do when from these 50 only 5 made the right decision?
It is better to trust Physics, it can help sometimes :-)
Hi All,
If we don’t take in to account the cable geometry and construction, Silver and Cooper cables play different just because they are different materials. If one likes Silver over Copper or the other way around please open a different post.

This post is about what can one do to reduce noise flor on a system with Silver cables.

Thank
Fil

Hi,
I have full silver cabling for speakers and interconnect from Argento Serenity signature and Acoustic Zen Absolute (old version full silver) . I agree with "ghdprentice" comment, you must have excellent elements in your gear to use silver cables otherwise you can face hardness but in high end chain the gain is important.
Regards,
Stéphane
My silver plated QED Anniversary biwire cables sound good to me. Best of both worlds, copper and silver. This cable has won awards for many years, the reason is it sounds good.