Wilson Audio Specialties Chronosonic XVX loudspeaker!! only $300,000.oo


What a bargain, still bet they sound great with the right amp up them, looking at that impedance/phase angle graph.
https://www.stereophile.com/images/421WXVXfig1.jpg
 
XVX is a very demanding load, with EPDR less than 1.1 ohms between 52Hz and 66Hz and between 197Hz and 287Hz, with minimum values of 0.91 ohms at 450Hz and 0.94 ohms at 3250Hz. The Chronosonic XVX should be used with amplifiers that don't have problems driving loads of 2 ohms and lower.

https://www.stereophile.com/content/wilson-audio-specialties-chronosonic-xvx-loudspeaker

Cheers George


128x128georgehifi
edgewound,

So how does one flaunt their wealth? Give me the exact dollar amount when flaunting begins with: cars, houses, clothes and stereo systems? Assume that this imaginary rich person is worth 100 million. How, exactly, should they spend the money? What meets with your approval? And is the flaunting in how they act or what they buy? I am sure there is some subjective moral imperative lurking in the shadows somewhere.


I would rather have the Von Schweikert Ultra 11s; however, too big for my room. Ultra 9s max at $200K. Most likely-VR9SE mk11 at $35K to $50K.  Custom listening room cost $160K so I'm covered there.
If you are serious about the 160K room, details would be wonderful. Hell even a 16K room might be interesting. I made most of my treatments.
@audition__audio Here it is again (I've posted at least twice in two years) 

Poured steel reinforced 12” 3000 lb. PSI concrete floor

Walls-

1” MDF

1/8” thick Acoustiblok vinyl sound barrier

¾” MDF

3 x 12 vertical studs, 14.5” on center

Staggered 13” wide 2 x 12 and 4 x 12 per vertical stud channel

13” X 4” X 48” 72lb. 4 chamber activated charcoal absorption filters staggered vertically up/down/up/down

4” Rockwool insulation over vacant stud channel area adjacent to filters

Flexseal all joints

¾” cherry plywood

 

Ceiling

4’ Sound Absorption Blankets

4” Rockwool

2 x 8 horizontal beams

5/8” X drywall paneling

1/8” thick Acoustiblok vinyl sound barrier

¾” cherry plywood

 

Recessed 9 BR40 65 Watt LED floodlights

2 Ton HVAC split system, low speed, high volume

70+ oz. plush cut pile carpeting

To this I added 4' X 2' acoustic foam paneling on side walls and suspended ceiling paneling (All paneling in wood frames)


Electric-Audio sources only Subpanel with 8 breakers for 8 duplexes, 10 gauge wire (lighting and A/C on main subpanel)

Synergistic Research Blue Duplexes for equipment