Frustrated with the sound of my system


Here is my system:
Rotel RCD-965BX CD Player as transport
MSB Link 2 DAC
Sonic Frontiers SFL-1 Signature preamp
Classe 10 amplifier
North Creek Audio Borealis speakers (Custom built kit speaker...something close to a Proac Response 2.5 design)
M&K V-75 sub
Kimber and Cardas interconnects
Kimber 4TC/8TC bi-wire speaker cables.

Here is my frustration:
The sound, regardless of music, sounds stringent, hard, really lacks air, and is anything but relaxed. It is fatigueing. I can listen to my Grado 60 headphones on an iPod and the sound is frustratingly more relaxed and has what I would call air.

I don't think that my system is that outstanding, but it really seems like I should be more pleased with what I am hearing.

I would be interested in your thoughts on where the most likely opportunity is. I really like the individual components of the system (OK the Rotel/MSB set up is old and just OK), but all together they seem to be underwhelming. I am thinking it is either in improving the digital front end (new player or DAC) or moving to a planar speaker to get the sound I desire. I have thought about new player like an OPPO 93 or 95, perhaps a tube based player or DAC, or else looking at something like a used pair of Maggie 12's or 1.6's. I have always enjoyed the Maggie sound.

In either case I am thinking that $2k is the absolute max I would want to spend on any solution. Thanks in advance. If there are other questions I would be glad to supply details.
stuartbmw3
Reading through your complaint, I can offer a different way to approach this problem. It's not a solution that most people will agree with, but I think its a legit way to start out in your case. You have identified something in your system that you don't like. Now the question is what to do. I say, locate the problem first, before you spend a lot of money on different components. After reading your post, it looks like you are not really sure what the problem is. That's OK; we all have situations like this at one time or another. But just guessing and buying different components is almost certain to fail. Think of it like this: If, for example, you decide to get a new CD player, think of what it is going to do. Buying a component like this is like buying an EQ with one setting. The worst part is, you do not know what the setting is until you actually plug it in and try it. I can tell you from personal experience that you will most likely fail. There is no better feeling than getting rid of your best component while leaving the problem on your shelf. Kiwi2 is suggesting a very good place to start. Get a cheap meter and a frequency sweep cd and see what is really going on. If you get some bad measurements you can take it a step further you can take it a step further and get a cheap EQ. (I got one for $40 on amazon. Behringer FQB800.) Use it to get a flat response in your listening chair. You might be surprised as to what you come up with. If you read some of the other posts from above you get: new CD player, fix the room, go analog ect. They are well meaning and any one of them might fix the problem; or none of them will. That is why I recommend a different approach. As far as your equipment goes, I have had your preamp and rotel Cd players (different models). I don't think either are the cause (the preamp is great). Also, I have had the Magnepans you mentioned. I wouldn't even think about those unless you can get a really good in home demo first. Anyway, I hope this info can help you out.
Hi all ! Sounds to me as you probably should spend some effort treating the room . You can spend a whole lot of money and get no improvement if the room is bad . How do I know this ? Been there done that .
I was in a similar situation and I simply started replacing elements of the system. This is simply reality, the way most of us do it. I doubt few were able to buy complete systems all at once. It took several years but eventually ended up with a really great system. I did belong to an audio club and got many ideas by listening to their systems. My guess is that you will end up wanting the sound of tube power amps, will change your source, and speakers. Some final tweaks to your cables and you will be all set. Don't rush and with time you will be able to afford more.
Chayro,

I read both of your posts and while you may have had a rough and confusing time in the past, things in the future will get a lot easier for you. The preamp is probably the most overlooked component in the chain. While there is no guarantee for success, now that you have a real understanding of how important it is component matching will be much easier. Simply put, you will be far less likely to play the tube, cables and accessors game. For example, I used to buy cables to offset things I did not like in my system; now I only need them to transfer the signal. I know it sounds very boring but I offset the boredom by listening to music. Unfortunately for the OP if this thread, I had the same exact preamp and it is an excellent piece. Unless it is broken in some way, I can't see that as the problem.
The room might contribute, but I don't think it is the main issue here. I would probably keep the preamp, sell the rest and build a new system.
I have the Grado that you use. You say that they actually sound more satisfying than your stereo, that means that the stereo is really bad.
Get yourself hi-fi.