Arrangement of components on rack


Now and again -- though not often enough, probably -- I spend some time unhooking and unplugging everything in my system, dusting the works, and then setting it all back up again. Makes me feel better, and it seems that the simple act of unplugging and then reattaching cables and power cords etc. improves the sound, too -- if only in my mind.

As I'm getting ready to do that now, I just had a thought: Is there a generally accepted arrangement for components sharing a rack? What I mean is: Are there components that ought be placed close together and those that should be better spaced out? My power amp sits between my speakers, with the rest of the gear over on the side wall.

I've got a turntable, so that takes care of what goes on the top shelf. The other components: A preamp, a separate phono preamp, a CD transport and DAC in one box, a Bluesound Node streamer.

With all else equal, should, say, the phono preamp and the preamp be near each other? Far apart? does it not matter? I've generally just kind of plunked things down and gone from there -- and haven't experienced too much trouble -- though some years back when I had the preamp (the main one, not the phono pre) up close to the turntable I had a bit of hum, so put the preamp on the bottom shelf and have continued to do so.

Still, as I got to wondering and am set to get to work on this soonish, I thought I'd ask if there's a generally accepted way of arranging things.

Thanks very much.

-- Howard

hodu
The mini monitors are a pair. I sit between the coffee table and desk centered on floor standers. About 7’ away and 5’ from back wall. A small sweet spot and at times it does tingle the senses. The mini’s are also centered in my LP and sing well with the front speakers. When I’m in that mood for four speakers. My friend had a quadraphonic hifi and we spent our teenage years spinning vinyl on that set. I have a soft spot for four speakers in play
Consider ventilation & weight and place them accordingly.  The only exception may be the turntable since it needs access and most likely have to be on top.

Since, even the longest distance between different components is not likely to be much, it is not even worth thinking about too much.
I use DeOxIt 2 to clean all contacts electrical.  It will clean up volume controls, interconnects and speaker wire ends.  Do it about once a year.  
Tube amp farthest away on the top (for cooling) on one side...turntable furthest away on the top at the opposite side.

Preamp as low as possible below amp (for microphony),  phono preamp and CD player below turntable.

In my case, when turning on from turntable to amp, the motion creates a smiley face right to left. Another smiley face from left to right to turn off. Easy for the wife and select guests to remember.

I have two dedicated audio lines and use one outlet for amp only and the other for all low level 
components. The turntable and CD player go to a Furman 2 component conditioner placed on the floor below the outlet. Preamps go to a 2nd Furman 2 component conditioner. Both conditioners sit in a low profile hardwood base off the floor and are always in the 'powered on' position. This fits in the 3-4" gap between the rack and wall.

This allows me to run signal and power cables in a manner where they cross at 90 degrees. I had some low level hum issues and the cross arrangement eliminated it.



I try and keep digital with digital and analogue with analogue and separate digital from analogue with copper sheets (Micheal's Craft Stores).  It's drops in the bucket but if you put enough in eventually you have something.