Possible issues with Marantz CD player


I have a Marantz CD player,  CD 6004.  Lately, I  hear  a loud  burst of  static when playing CDs. It is random, and intermittent rather than a constant buzz.  Quite pronounced. Not a hum or buzz from light dimmers or TV or the like. 
Sounds more like a skip in the CD,or like the sound a tuner would make if you were changing stations and lost the signal.  A loud squawk.  

I have tried, but so far cannot replicate it with vinyl.

It has occurred with three different CD, usually on the first song. Then it will usually play the rest without incident.

Possibly some problem with the laser?

We have two large, active German Shepherds, so I thought we might have had a tail-strike to one of the speakers.  I took the dust cover off the speaker, examined the woofer visually for tears or deterioration.
These are Klipsch Heresy IIs, so the tweeter and mid range are pretty well protected.  It looked OK, and if it were the the speaker, I'd expect to be able to replicate the issue with vinyl. 

I also checked the speaker connections, at the speaker, and at the amp. Seemed solid. 

CD player is maybe 5 years old or so, pretty much bulletproof until this, assuming it  actually is  a problem the CD player. 

Anyone had a similar issue with CD players?  Or picking up random noise in the system somewhere else?





cincinnatipete
It happens with multiple discs.  
Worse on some than others, but I've not been able to play a CD without the intermittent and loud static for the last week or so.

 I can't replicate it with vinyl. Not difficult at all to replicate with CD.  Just insert t another one, and press play.  Within 5-10 minutes of listening or less, you hear it.  Then it goes away, usually recurs at random. 

I suppose it could be in the CD section of the amp,  which is old but has given very good service over the years. I could drag the Marantz up to work, swap it out with my Sony and see if the problem occurs at work, goes away at home. 

Sad part is, the Marantz otherwise punches past its weight, sounds pretty  darn good.  Since 1988,  I've had Denon, Luxman, Sony (non-ES) and this one. Until it started (presumably) acting up, it was as good as any I've owned, better than most. 

welcome to the wide world of failing marantz cd players... many owners of bricks out there, me included... the sh*t breaks, then no replacement lasers etc etc... 
I doubt it's the amp since the turntable sounds ok but swapping it out is a good idea to narrow down where the problem truly lies.
cincinnatipete

it certainly sounds like (no pun) the laser/optical block. Is the CD 6004 made in Japan? If so, seek out an authorized Marantz repair center.
If the player was made in china, look for a better spinner(made in Japan).

Happy Listening!
@jafant

top end marantz 8005 and ki ruby’s sacd players have failing lasers... to add insult to injury marantz does not stock laser replacements - their service centers say sorry you are s-o-l there are no parts -- this is one prominent case of japan made being piss poor, leaves customers hanging big time

the better japanese spinners are from sony and teac/esoteric...