All Benchmark System Question


Long time lurker, first time poster. So question relates to my all Benchmark System. I am using the all Benchmark system (AHB2, HPA-4 and DAC 3B with my P3SER’s and loving it most of the time. But if I wanted to add a little more warmth for that 20 percent of the time I think I need to, What would be the best way to do that. My thoughts are maybe switching out the DAC 3B some of the time with an Audio Mirror Troubador, keeping the rest of the system the same. My other, more expensive thought is to leave the DAC 3B and i swapping in the Coda 07x part of the time as I have heard the AHB2 and Coda 07x is a great combination. Obviously that is an expensive fix for 20-30 percent of my listening.
What do you people think?
regg
DEQX HP-5? Never heard of it. Anybody else use it? @mijostyn do you really feel switching out DACs won’t make any difference? Seems like others have spent a lot of time and money switching out DAC’s to get a more “analogue” sound seemingly with success. Again, I think my all Benchmark system is killer, especially with the somewhat warm P3SER’s, but sometimes I would like to hear a different flavor.
@yyzsantabarbara , I just saw some great reviews of the KEF KC62 subwoofer which does as you stated have an apartment switch and it’s tiny-great for my apartment! Extremely interesting, thanks to you and @mapman for the suggestion. Another thing on my list although I have heard it’s hard to get the crossover right. Have to figure out how to hook it up to the AHB2 but I think I am going to pull the trigger.
@regg In 2 weeks I am going to setup a ROON system for someone. He has used DEQX gear for 15 years (maybe 5 models). I am going to show him the ROON setup with DSP run via CONVOLUTION filters for my RAAL SR1a. This is what I run for both my floorstanders and my RAAL (my office is small with big speakers). These are 2 different DSP implementations done by Accurate Sound out of Canada.

I told him that the Convolution filter will likely be much better than his DEQX gear. I think the Convolution filters will be better because it uses a computer and you are not limited by processing power on a computer verses a dedicated piece of audio gear. Need more power? Just buy a more powerful computer and use the same or more demanding Convolution filter.

Regarding the crossover for the AHB2 + sub. Did you read the link I posted earlier describing how to setup a sub with the AHB2?

I just played on of my favorites disks, Earth Wind and Fire - Greatest Hits on the CODA 07x + Gustard X26 Pro and AHB2 + Thiel CS3.7. I was so mesmerized by the music I stopped my work and just listened to the whole album. I then played the album again. This time I put in the HPA4 and used the same XLR from the Gustard to make an apples to apples comparison. The HPA4 is a little clearer more detailed and beautiful but that CODA 07x and Gustard combo was a bit warmer and was magic.

BTW - I use fibre for my streaming so the computer noise is not a factor. I am however limited to only having DSP done for my DAC, not SACD or tuner which are analog outputs.

@unsound There is a market for an AHB3 but BM seems to think the amp is perfect as is and if you need more power then run it in mono. Though in mono it is not rate at continuous power in 2 Ohm. The stereo version is rated at 2 Ohm continuous power (something in the 250 watt range).
Someone wanted my take on the Topping pre90 vs the HPA4. I only got the Topping pre90 today and it has only about 6 hours on it.

I must say I am impressed by this little preamp. It sounds a lot like the HPA4. That is they are both ultra quiet and I am not sure what I loose sonics wise with the pre90 over the HPA4. I do lose an RCA input and the great volume control of the HPA4. Though the Toppings volume was much better than the Topping A90 headphone amp I had at one time (and gave away).

I love the fact that the output on the pre90 has a switch to select RCA or XLR. In my situation, with my CODA 07x preamp being part of the equation and that unit not having a power switch (always on), it was too dangerous for me to setup the RCA and XLR outputs on the HPA4 (just used XLR). I do not think the HPA4 has such an output switch and if it did it is too complicated to keep track. The pre90 makes this easy with the GUI and buttons.

I did some listening to my Sony SCD-1 SACD/CD (modified) player into the Topping pre90 by XLR and then RCA into my D-Sonic M3a 800s and then into my RAAL SR1a. I am thinking this pretty amazing and something I was too afraid to do with the HPA4. The D-Sonic also has a switch to select RCA or XLR input.

The Sony SCD-1 does not have DSP done like my digital streaming. It sounds great since the room is not part of the listening experience with the RAAL SR1a headphones. I however, do use a Convolution file on my RAAL SR1a + DAC streaming and it is better, but this vintage 20 year Sony SACD/CD is one of the best ever built and still sounds killer. I will be listening a ton more to the Sony if I keep the Topping pre90.

I still need this unit to burn in more and test it with my streamers into my Thiel CS3.7 floor standers. I have 15 foot XLR cable from the preamp to the Benchmark AHB2 mono amps. It sounds very good so far but I will do some more detailed comparisons after more hours on the Topping.

Here are some reasons for me to keep the Topping pre90:
- I sold my Meze Empy headphones last week because with the way my RAAL SR1a are now setup with the Convolution from my streamers and also the analog sound today with the Sony SCD-1 the Empy was toast. I bought the HPA4 over the LA4 because of the Empy needing a headphone connection.
- the benefit of the RCA/XLR output switch on the Topping pre90.
- most importantly the pre90 sounding so much like the HPA4 so far. I am starting to love my CODA 07x as my main preamp and the HPA4 or Topping as second fiddle.

I am now playing the Benchmark DAC3B with a Convolution filter designed for the RAAL SR1a into the Topping pre90 by RCA. The output is Topping pre90 RCA to the D-Sonic amp. It sounds great, though not as great as the CODA 07x in this scenario. This time I have to give the main credit to the Convolution filter for making the Topping and DAC3B sound excellent on the RAAL SR1a.

BTW - it is almost 3AM and I am still listening to the pre90 without any complaints about the sonics. A great sign. I am tending to think I will be selling the $3000 HPA4 and go with the $600 Topping pre90.