2. analog
  3. 155603-92835

2020 update : JC Verdier La Platine

A recent encounter with a JC Verdier dealer as well as a recent Audiogon discussion thread led to the start of this thread. He was in my house updating my La Platine which had been in storage for ten years with thread and oil. While he has high regards for the deck, his newer clients nevertheless prefer a Techdas iii than an 'old' La Platine. Given the proliferation of expensive decks in the past dozen years, La Platine has become very much under-appreciated. 

It's clear to me that the influence of the La Platine is everywhere to be found. Specifically, the magnetic suspension system that was employed 30+ years ago. Even SOTA offers their newer decks with mag. lev. features. And if you read this review: https://www.callas-audio.nl/Callas%20Platine%20Mod%20Kit%20Review.pdf, the Continuum Caliburn uses the same concept, which was not acknowledged in Fremer's review, albeit with more sophisticated , and expensive, execution.

It is also clear to me that there is much misunderstanding of the workings of the La Platine. I for one have contributed to this. The motor of the La Platine, for example, has been much maligned. The thread drive is another aspect of the turntable that have been described as inferior. With regard to the motor and thread drive, I have been set straight by Chris @ct0517 and Lyubomir @lbelchev. Experimenting with the different types of silk threads, the tightness to the platter  and a renewed understanding of the soundness of the Philips motor have been rewarded with better dynamics and transparency. 

The funny thing is that during the past two years of re-engagement with audio, I have questioned ownership of every components in my arsenal except the La Platine. It has always been a keeper. I wonder if La Platine owners would contribute to celebrating this 'old' deck with tales, advice, and insights?

Cheers!
ledoux1238
pani
1,219 posts
 
@ledoux, that youtube video was to tell you how far people have gone to tweak the Verdier. I did not get to that point because that would have meant usage of a tape drive (like in the video) with appropriate modification to the motor capstan and also the flywheel in that video is a very expensive one designed by the person himself. Yes, it sounds very good after all these mods.

The sound of the idler to me is simply superior to many belt drives I have heard (including Verdier). The issue with idlers is to find a well done TT which is low noise and high resolution. In that respect a Nantais Lenco or a Shindo Garrard is very well done with all the qualities of idler (speed, dynamics & flow) with a very low noise floor.
ledoux1238 OP
284 posts
 
@pani 
I appreciate the video and the beautiful motor / flywheel assembly. Yes, it comes from a very committed Verdier adopter. 

Regarding tweaking the Verdier, there are two aspects. The first  is to understand the original intent of the designer. With that understanding in mind, then deciding whether tweaking certain design features would improve sonics. The second is of course seeking improvements beyond the intended design. The past two years has been to learn not just how to improve the Verdier, but what the original design ideas were. 

Defeating the suspension or replacing thread with tape would be  examples. The Thread drive / Philips motor / plinth suspension is thought of as an integral package by the designer. Both the La Platine and the Nouvelle Platine ( I believe ? ) are suspended decks and they were meant to work best with thread drive. While I have tweaked with varies thread and belts, to me very fine silk, not viscose, threads work best. If one ventures into tape drive, with the original suspension intact, I wondered if you will hear improvements. However, in the video the table is sounding very nice and clearly improvements can be had by going beyond the original design parameters. This aspects of the Verdier decks is perhaps the most fascinating and at times, frustrating.
ledoux1238 OP
284 posts
 
@pani 
I appreciate the video and the beautiful motor / flywheel assembly. Yes, it comes from a very committed Verdier adopter. 

Regarding tweaking the Verdier, there are two aspects. The first  is to understand the original intent of the designer. With that understanding in mind, then deciding whether tweaking certain design features would improve sonics. The second is of course seeking improvements beyond the intended design. The past two years has been to learn not just how to improve the Verdier, but what the original design ideas were. 

Defeating the suspension or replacing thread with tape would be  examples. The Thread drive / Philips motor / plinth suspension is thought of as an integral package by the designer. Both the La Platine and the Nouvelle Platine ( I believe ? ) are suspended decks and they were meant to work best with thread drive. While I have tweaked with varies thread and belts, to me very fine silk, not viscose, threads work best. If one ventures into tape drive, with the original suspension intact, I wondered if you will hear improvements. However, in the video the table is sounding very nice and clearly improvements can be had by going beyond the original design parameters. This aspects of the Verdier decks is perhaps the most fascinating and at times, frustrating.
ledoux1238 OP
284 posts
 
While reading a review of VPI Titan on Mono & Stereo magazine, The writer, Richard Mak, mentioned the Verdier La Platine. He owns the Verdier with a modified suspension. He apparently used replacement springs that are 1.6 times stronger than existing. 
How do you go about dismantling the existing suspension footers? Has any one attempted such a tweak?
phantom_av's avatar
phantom_av
326 posts
 
Can anyone advise on the motor upgrade or where to buy one? Or a Conversion kit to change it to a battery operated?
More to discover