certainly would like to own an Atmasphere valve amp. Understanding the options better would help in deciding which one.In the smaller amps there are three options- copper foil Teflon V-Caps for coupling capacitors in the amps, additional filter capacitance in the output section (useful for keeping IMD down at higher power levels) and the Caddock resistor option. In all cases these options are available so you don't have to open up the amp to 'tweak' it. We've seen audiophiles do this sort of thing for decades and most of the time (not all) they actually do more harm than good. So we offer the most effective tweaks in advance. The larger amps like the MA-1 have some of the options as standard; the MA-2 and MA-3 have all of them as standard.
Tube vs. Solid State Amplifiers
I found this really good link regarding the differences:
https://www.caryaudio.com/2018/06/04/vacuum-tube-vs-solid-state/
I've heard some (who are much more knowledgeable than me) say that a tube amp and solid state amp which are rated at the same output power in practice will not drive a speaker to the same level, that in selecting amplifier power levels, you would get similar results from lower powered tube amps.
I thought it would be interesting to see what those who know much more about this subject would contribute to this discussion.
https://www.caryaudio.com/2018/06/04/vacuum-tube-vs-solid-state/
I've heard some (who are much more knowledgeable than me) say that a tube amp and solid state amp which are rated at the same output power in practice will not drive a speaker to the same level, that in selecting amplifier power levels, you would get similar results from lower powered tube amps.
I thought it would be interesting to see what those who know much more about this subject would contribute to this discussion.
- ...
- 77 posts total
- 77 posts total