BNC Cable is RG6 the best?

kijanki,
I could go 1.5M but the AfterDark clock and the EtherRegen are very close together and that would mean a lot of cable drooping.

audiojedi,
I'll take a look at the Black Cat Silverstar.

Since, I have the RG-6 cable already terminated with a BNC I'm going to try that first. I still wonder what the clock transfers. Is it audio signal???

ozzy

audiojedi,
I have not been able to locate a Black Cat cable but I can buy the  Apogee Wyde Eye. It looks to be purple, is that correct?
It comes in many lengths even one foot long!

ozzy

Hi Ozzy: The Apogee Wyde Eyed  is a great cable for the money ($50/meter), however, IMO it would be a lateral move from the stock cable you're using now. I went from the stock cable to a VH Audio Ag Pulsar cable I was using from a CD transport to DAC (https://www.vhaudio.com/pulsar-ag.html). This was a major improvement in the SQ of all areas. You can also contact member fsmithjack about the upgraded After Dark digital cable. He is using one himself. Good listening. Jeff

Hi Ozzy: Also, if you aren't using one already, I highly recommend that you get the After Dark LPS to mate with the Queen clock. While you're at it, pop a Synergistic Orange small 1A Fast Blo fuse into it (Remove the four hex key screws from the fromt cover. The fuse sits right there). Then, upgrade the DC umbilical cable from stock (Ghent Audio, Audio Sensibility, or DIY). Get ready to be dazzled. No BS. 

yoby,
Thanks for the info. Originally I did communicate with the person you referred to and wanted to try a unit and perhaps do a review. He was more inclined to sell units than audition them, So, I then asked to buy one. He stopped answering emails, phone calls or even messages sent through this forum system. (I think he was having trouble obtaining more units and had a backlog of pre-purchased units). I shouldn’t say never, he eventually messaged me back weeks later after I gave up hope and then bought the clock direct from AfterDark in Hong Kong. BTW, It was delivered in 5 days! So he is off my list. (No soup for him?)

I have a very hi-end, powerful 12v Linear power supply that I connected to the clock. So I think I’m all set with that.
Also, I do have a dc cable from Ghent Audio.

But, I may try a SR fuse in it after I complete the BNC cable search.

ozzy