Efficient speakers v. less efficient speakers

Efficient speakers v. less efficient speakers

If driven with the appropriate amplifier(s), meaning a higher powered amplifier for a less efficient speaker and a lower powered amplifier for a more efficent speaker, are there any difference?rlew01-18-2006 8:28am

Huge difference. Like Night and day'/
 Black and white
like complelely opposites, 
Like different sound worlds.

If you have a  xover style speaker, its not really going to matter if you have a  50 watt amp, or a  1000 watt amp. 
Well it obviosuly will make *some difference* in how speaker responds, 
But who really needs 100 watts??  AT what db listening levels??
fact of the matter is higher sensitive speakers will perform , = RESPOND, far superior with just about any amplifer , from SETs, to EL34's to Jadis's JA800 weighing over 800 lbs, like some 500 pure class A watts.

Whereas with xover low efficiency speakers,, folks keep chaging amps out thinking,,,**well maybe, just  maybe if I swap out my amp, I'll get better sound from my system*
Wrong. 
Nothing will fix the fact that lower efficient speakers will wear on your nerves after a  while  Its only a matter of time..
So then some figure,,,hummm, maybe i should swap out speakers,,for yet another xover low efficient speaker,,,**Yeah now  THATS much better,,,** then after some years,,, hummm, just maybe,,,and so on and so forth.
Like a  Merry Go Round.
In the end, they finally try a  high efficient wide band,,
WOW
where have I been.
= On the MerrtGoRound.

gregm3,252 posts01-18-2006 10:47amThe most obvious differences are technical and practical -- not theoretical.
In theory, all you need is twice the energy for every 3db difference. In practise however your 90db spl/1m/2,83V will need 1000W energy to reach 120db spl and will have disintegrated long before those watts reach them!
That's assuming you have 1000Watts available to you, of course.

So, higher sensitivity allows dynamic headroom with reasonable requirements -- say 50-100 watts amplification. Indeed, if you have REALLY sensitive speakers, you can get away with less than 50 watts energy -- much easier to find than 1000

~~~~~~~~~~~~~~~~~
Yep, 
That pretty much sums it up. 
Low efficient speakers all hundreds of them, have major issues. 
And suck the life blood out of the amp's ability to voice beautiful music, 
I have no idea whoever started these xover designs. But I sure wish they had not.
WE should have stayed with the 1929 Field Coil Full Rannge concept ONLY and no others.
Xovers are nothing more than a marketing scheme. And we all took the bait, Hooked.
WEll I bit the line.
There is not 1 xover design that even slightly interests me. 
Even if FREE.
No thanks. Donate the Wilsons to charity, I don't want them. 

audiokinesis2,577 posts01-19-2006 3:15pmI agree with the posts pointing out that a high efficiency system usually has better dynamic contrast than a low efficiency system.

Let me try to explain why. It's a nasty little secret almost nobody talks about.


~~~~~~~~~~~~~~~~~~~~~~~
No doubt about it
This is the most dirty secret, *Best Kept Secret* in all audio land.
The fact that xover/low efficient speakers have serious issues, 
And labs /designers, well knowing that  its cheap to make low efficient drivers and put them in boxes and make HUGE PROFITS. 

The amount of money poured into xover box designs,  past 50 yrs, 
WE've all contributed Billions, If not Trillions to these scams called speakers. 
We've been *Had** and Most have not a clue as to whats really going down. 

aball1,998 posts01-18-2006 2:24pmYes, a big difference. High efficiency means lots of detail and resolution. Just try hooking up a noisy amp to a 100dB sensitive speaker and see what I mean. Inefficient speakers lose lots of musical information in the process.


~~~~~~~~~~~~~~~~~~~~~
BAMMMM
SmackDown,
Of course most audiophiles  can not understand, nor believe what you are saying here. 
The Industry has them deaf to high sensitivity speaker designs. 
They can not hear what you are saying. 
Your words are falling on deaf ears.

shadorne7,467 posts01-20-2006 11:08amRlew,

I am only concerned that someone reading this thread will think that a high sensitivity speaker is necessarily better than a low sensitivity speaker.

~~~~~~~~~~~~~~~~~~~
back in your day, 2006, this way so true.
Low efficient speakers is pretty much all we had. Horns were too big, heavy and expensive.
Wide bands from Fostex, Lowther were OK, and were indeed far superior to most xover desifgns,. 
But with rolls offs on boths fq ends, Folks were not so interested. 
But since 2010, wide bands have come into all new high technology and blast any/every xover design away in a  shootout.
So your statement was kind of true in your 2006 post, but now in 2021, It is true
Higher sens wide bands are fundamentally superior to xover designs. 
I am blowing the Ram's Horn, but only a few will  hear the horn (pun intended)