2. speakers
  3. 1329468063

Amp recommendations for Tannoy Canterbury SE

I have just purchased the Tannoy Canterbury SE speakers and am driving them with my existing Ayon Audio Triton II KT88-based monoblocks delivering 100 Watts per channel. My only source Ayon CD-5 is connected directly to the Ayon monos, since the CD-5 has got a decent volume control. I listen to mostly very fast and dynamic music including rock, techno and others.

My initial impressions are that I am not getting speed, punch and tight bass. I am wondering if this is possibly due to an amp mismatch. While the tube amp's 100 Watts seem more than adequate for Canterburys 8 ohms and 96db spec, I wish I could get better results.

I am seeking recommendations on what could be the best suitable amp for the Tannoy Canterburies. I am open to both tubes and solid state.
- What could be some of the best Tube Amps as well as Solid State Amps that could be a good match ?
- Existing Tannoy Prestige series speaker owners - what amps do you use ?
- Should I be looking at tube amps which are based on tubes other than KT-88 ?

If you have any other recommendations in positioning/configuring the Canterburies please let me know too.

Many thanks in advance
Wilfred
wilfredt
sksos1
387 posts
 
My best friend Kwame has Canterbury SE and has used amps in the 25-35 watts with excellent results. Currently using a Thor 30 watt mono-block that has sounded exceptional. Wonderful speaker.
wilfredt OP
36 posts
 
Dan, Thanks, I shall look into VAC Phi 200. Glad to know that VAC is well experienced with Tannoys. Also nice to hear that you love your updated amps ! Enjoy !
wilfredt OP
36 posts
 
Sksos1, thanks, I guess as mentioned earlier in the thread, the current delivery capability maybe more important than the watts specification itself. Will read more about the Thor.
maril555
619 posts
 
I don't know how much you can extrapolate from this, but as Islandmandan mentioned above, Kevin Hayes had been using various Tannoy models at the shows lately.
At the last CES he used the top of the line Tannoy Kingdom Royal speakers with his Statement stereo amp (450 Wt/Ch) and it sounded pretty good. I would imagine, the lesser VAC amplifiers to be a good match with your speakers, provided, they have adequate power to drive them. Don't let "high" sensitivity rating fool you.
maril555
619 posts
 
On the other hand, I think your Ayon Triton should be perfectly fine, as well.
The answer to your concern lies elsewhere- room placement, acoustic treatments, support system under the speakers, etc.
i can tell you from my experience, that moving a chair just a few inches made a difference b/w "no bass", "boomy bass" and "good bass". Had I not spent time with the setup, I'd be chasing different amps, cables and speakers right about now with the corresponding spending budget.
Mulveling is absolutely correct- the most return on the investment ($0- $ minimal)comes from the careful system setup.
Slightly more expensive, but still much better option is to hire a setup specialist. As a matter of fact, Jim Smith, the author of the "Get Better Sound" book, just purchased your exact speaker, and posted here, how much he loves them.
Just hire him!!!
More to discover