2. speakers
  3. 1329468063

Amp recommendations for Tannoy Canterbury SE

I have just purchased the Tannoy Canterbury SE speakers and am driving them with my existing Ayon Audio Triton II KT88-based monoblocks delivering 100 Watts per channel. My only source Ayon CD-5 is connected directly to the Ayon monos, since the CD-5 has got a decent volume control. I listen to mostly very fast and dynamic music including rock, techno and others.

My initial impressions are that I am not getting speed, punch and tight bass. I am wondering if this is possibly due to an amp mismatch. While the tube amp's 100 Watts seem more than adequate for Canterburys 8 ohms and 96db spec, I wish I could get better results.

I am seeking recommendations on what could be the best suitable amp for the Tannoy Canterburies. I am open to both tubes and solid state.
- What could be some of the best Tube Amps as well as Solid State Amps that could be a good match ?
- Existing Tannoy Prestige series speaker owners - what amps do you use ?
- Should I be looking at tube amps which are based on tubes other than KT-88 ?

If you have any other recommendations in positioning/configuring the Canterburies please let me know too.

Many thanks in advance
Wilfred
wilfredt
Ag insider logo xs@2x
islandmandan
1,260 posts
 
Hello Wilfredt, all,

A lot of good input on this thread. FWIW, I thought I would mention I have been using a Sonic Euphoria tranformer-based passive line stage for years, and have always been happy with the gain (or, more rightly, attenuation) provided. Since I've switched back to Tannoy and tubes, I've been curious what an active line stage would do, but resources always seem to go elswhere.

I have used from 100-300 Wpc SS amps with my current Tannoys, but the VAC PA 35.35 remains the best match of what has been avaiable to me. Actually, I take that back, Zsolt Mathe brought one of his Z-Infinity Z-100 (50Wpc) amps over (he wanted to hear it through my speakers), and it actually sounded better to me than my VAC. I don't know how the two amps would stack up now that the VAC had its factory upgrade, but I think it would be close.

Anyway, an enjoyable discussion-
Regards,
Dan
wilfredt OP
36 posts
 
Good news is that this weekend I spent some time playing with the speaker positioning which has yielded good results. I may still have to spend more time in fine tuning though.

Another big improvement I got was when I used the provided spikes. The base became tight and the overall presentation became effortless. I was not expecting such a change and was pleasantly surprised.

I will be interested in knowing whether the Canterbury owners use the stock spikes or any better spikes or vibration control accessories. Also, I am wondering what is the size / measurement for the spikes, if I were to explore some other vibration control mechanism.
wilfredt OP
36 posts
 
Now that I got some idea on the Amp possibilities, my next question would be what are the best interconnect/speaker cables that would match with the Tannoy Canterbury SE.
I currently use Gabriel Gold Reflection Interconnect and Acoustic Zen Absolute Speaker cables, which are both Silver based. I am wondering which brand cables worked best for you or copper/silver based cables in general.
dover
2,247 posts
 
Wilfredt, prepare for a thousand different views. For me I value speed timing and coherence and I run MIT Oracle/Reference through the whole system. Cardas Golden Reference - sounded warm, coloured and confused, Kondo Silver - pleasant at low levels, but discombobulated in the upper midrange and little or no coherency, Nordost ??? mega$ - thin, bright lacking harmonic structure.
musicophile's avatar
musicophile
58 posts
 
I really like LFD silver cables with Tannoy. Tannoy often use LFD cables inside.

I do not sell LFD.
More to discover