Arcam CD-92 -- good value used?


Do you consider an Arcam CD-92 a reasonable value for a modest system assembled from used components? How well do you think it would stack up against the later CD-73, the Rega Planet 2000 or the Rega Jupiter? For what it's worth, I'm awaiting delivery of a refurbished Arcam CD-92T CD player I picked up via auction for $665 plus shipping. It will replace a Cambridge Audio D500 in a system with B&K Pro-10MC preamp, NAD C270 power amp, Vandersteen 1b speakers, MAS Gray IC's, Cardas Twinlink power cord for CDP, Signal Cable speaker cables. From what I understand, the CD-92 was produced about five or six years ago, part of the same product line as the less expensive CD-62 and CD-72 and the more expensive FMJ-23. Like the prior Alpha 9 and the FMJ-23, the CD-92 used Arcam's version of the dCS Ring DAC. Apparently, it also had an HDCD decoder and Sontech vibration dampening material in the chassis. It's evident that the CD-92 does not offer the latest available technology. Comments on the CD-92 on older Audiogon and AA threads varied considerably, with some describing it as clear and detailed but smooth with deep bass extension, and others describing it as forward, digital-sounding, and thin in the bass. So for those who have owned one for a while, or at least listened to one, do you think this will represent good value, and a reasonable match with the other equipment in the system?
02pete
HI, I've owned the Arcam CD-92 for several years,and have never had a bad thing to say about it. I've had several not to mention cheaper units,the Ah Tjoeb with upsampler,Sony 999ES Modwright with signature truth mods and the Arcam CD-92 hangs in there only to be beat by the Sony Modwright and that's with the right tubes for my taste.One word of advise for the Arcam is add a bit of dynamat or similar a little at a time because it responds drastic to this.After it is damped to

your taste,cut some 3/4x3/4 wood blocks -I used maple getting the idea from the myrtle wood blocks I beleive Ayre uses,and set them under the player raising it off the original footers. I used three blocks,two in front and one in back. Now if you want to further tune the player add some weight to the top of unit in various amounts and locations a bit at a time. I found the weight was not necessary after the chassis was dampened. My experience was the dampening really smoothed out the response and the wood footers actually increased the bass.I have never owned a cd player that respnded to these tweeks before,but can tell you without a doubt it is a serious upgrade.I also use a custom power cord that seems to add a bit also. My Sony modwright was recently sent back to be repaired due to a lightening storm so I broght the Arcam back out until the Modwright returns amd I have to tell you,it was quite refreshing especially on first listen of the Arcam. I told myself for the money of this player and its accuracy of music reproduction ,It crossed my mind to sell the Modwright on return. The bottom line is they are giving these players away at 600.00-800.00 bucks. and if you're looking to upgrade,spend some serious time looking at your other equippment before sending the Arcam cd-92 down the road.
Arcam used pretty mediocre quality capacitors in this unit (unlike the CD73), and as a used unit a few years old, off the shelf, with definite capacitor deterioration, you are NOT going to hear the sound of which it's capable.

As a used unit, though, if the price is right, it's a good buy, provided you understand that there is absolutely no doubt whatsoever that you're going to have to invest some effort to bring it up to its true potential.

And that effort is worthwhile - after a correct restoration, it is truly spectacular.

See my Arcam CD92 restoration here
thanks Yachadm....i'll keep you in mind. i've owned a cd23t & now own a cd23. (sold the cd23t & tried to upgrade & went backwards like we sometimes do). i've owned some good cdp's (cary 306, arc cd mkii, a couple regas) & i prefer the ring dac w/hdcd.